Onye nrụpụta ODM China oyi dọtara enweghị nkebi Carbon Steel Tube St52
We depend on sturdy technical force and continually create sophisticated technology to meet the demand of ODM Manufacturer China Cold Drawn Seamless Carbon Steel Tube St52, We sincerely welcome overseas prospects to refer to with the long-term Cooperation and also the mutual enhancement.We strong believe ka anyị nwee ike ime nke ọma na karịa.
Anyị na-adabere na ike nka siri ike ma na-emepụta teknụzụ ọkaibe iji gboo ihe achọrọIgwe anaghị agba nchara China St52, St52 igwe anaghị agba nchara, Anyị nwere ihe karịrị ndị ọrụ 200 gụnyere ndị njikwa nwere ahụmahụ, ndị na-emepụta ihe, ndị injinia ọkaibe na ndị ọrụ nwere nkà. Site na ịrụsi ọrụ ike nke ndị ọrụ niile n'ime afọ 20 gara aga, ụlọ ọrụ ya na-esiwanye ike na ike. Anyị na-etinye ụkpụrụ “onye ahịa mbụ” mgbe niile. Anyị na-emezukwa nkwekọrịta niile ruo n'ókè ya mere na-enwe ọmarịcha aha na ntụkwasị obi n'etiti ndị ahịa anyị. A na-anabata gị nke ukwuu ileta ụlọ ọrụ anyị n'onwe gị. Anyị na-atụ anya ịmalite mmekọrịta azụmahịa na-adabere na uru otu na mmepe na-aga nke ọma. Maka ozi ndị ọzọ cheta ka egbula oge ịkpọtụrụ anyị..
Nchịkọta
Ngwa
A na-eji ya eme ihe dị elu nke carbon structural steel, ọkpọkọ mmiri ọkụ dị ala, nnukwu uzuoku uzuoku enweghị nkebi carbon steel pipe.
Isi ọkwa
Ọkwa nke elu-edu carbon structural ígwè: 10#,20#
Ngwakọta kemịkalụ
| Ọkọlọtọ | Ọkwa | Ngwakọta kemịkalụ(%) | |||||||
| C | Si | Mn | P | S | Cr | Cu | Ni | ||
| GB3087 | 10 | 0.07 ~ 0.13 | 0.17 ~ 0.37 | 0.38 ~ 0.65 | ≤0.030 | ≤0.030 | 0.3 ~ 0.65 | ≤0.25 | ≤0.30 |
| 20 | 0.17 ~ 0.23 | 0.17 ~ 0.37 | 0.38 ~ 0.65 | ≤0.030 | ≤0.030 | 0.3 ~ 0.65 | ≤0.25 | ≤0.30 | |
Ngwongwo igwe
| Ọkọlọtọ | Ọkpụkpụ ígwè | Ọkpụrụkpụ mgbidi | Ike ọdụdọ | Mpụta Ike | Ogologo oge |
| GB3087 | (mm) | (MPa) | (MPa) | % | |
| ≥ | |||||
| 10 | / | 335 ~ 475 | 195 | 24 | |
| 20 | 15 | 410 ~ 550 | 245 | 20 | |
| ≥15 | 225 | ||||
Ndidi
Ikwenye ngbanwe nke dayameta mpụta nke tubes ígwè
| Ụdị tube ígwè | Ngbanwe ekwe omume | ||||||
| Hot akpọrepu (extruded, gbasaa) ígwè tube | ± 1.0% D ma ọ bụ ± 0.50, were ọnụ ọgụgụ ka ukwuu | ||||||
| Oyi adọtara (akpọrela) ígwè tube | ± 1.0% D ma ọ bụ ± 0.30, were ọnụ ọgụgụ ka ukwuu | ||||||
Ikwenye iche iche nke mgbidi ọkpụrụkpụ nke na-ekpo ọkụ akpọrepu (extrusion, mgbasa) ígwè tubes
Nkeji: mm
| Ụdị tube ígwè | Dayameta dị n'èzí nke tube ígwè | S/D | Ngbanwe ekwe omume | ||||||
| na-ekpo ọkụ akpọrepu (extruded) ígwè tube | ≤ 102 | - | ± 12.5% S ma ọ bụ ± 0.40, were ọnụ ọgụgụ ka ukwuu | ||||||
| > 102 | ≤ 0.05 | ± 15% S ma ọ bụ ± 0.40, were ọnụ ọgụgụ ka ukwuu | |||||||
| > 0.05 ~ 0.10 | ± 12.5% S ma ọ bụ ± 0.40, were ọnụ ọgụgụ ka ukwuu | ||||||||
| > 0.10 | + 12.5% S | ||||||||
| -10% S | |||||||||
| na-ekpo ọkụ ịgbasa ígwè tube | + 15% S | ||||||||
Ikwenye iche iche nke mgbidi ọkpụrụkpụ oyi adọta (akpọrela) ígwè tubes
Nkeji: mm
| Ụdị tube ígwè | Ọkpụrụkpụ mgbidi | Ngbanwe ekwe omume | ||||||
| Oyi adọtara (akpọrela) ígwè tube | ≤ 3 | 15 - 10 % S ma ọ bụ ± 0.15, were ọnụ ọgụgụ ka ukwuu | ||||||
| > 3 | + 12.5% S | |||||||
| -10% S | ||||||||
Achọrọ nnwale
Nnwale ire ụtọ
Ọkpụkpụ ígwè nwere dayameta dị n'èzí karịa 22 mm na ruo 400 mm, na ọkpụrụkpụ mgbidi karịrị 10 mm kwesịrị ịnwale ule ncha. Mgbe ihe atụ na-agbadata
Nnwale ịgbagọ
Ọkpụkpụ ígwè nwere dayameta dị n'èzí na-erughị 22 mm kwesịrị ịnwale ule ịgbagọ. Nkuku na-ehulata bụ 90o. Oghere nke na-ehulata bụ okpukpu 6 dị n'èzí nke tube ígwè. Mgbe ị na-ehulata ihe nlele ahụ, a naghị ekwe ka ọkpụkpụ ma ọ bụ mgbawa na-apụta na ihe nlele ahụ.
Nyocha macroscopic
N'ihi na ígwè tubes kpọmkwem mere site na mgbe na-awụpụ billets ma ọ bụ nchara ingots, ndị na-eweta kwesịrị ekwe nkwa na ọ dịghị ọcha ntụpọ, adịghị ọcha, sub-elu elu ikuku egosipụta, okpokoro isi ma ọ bụ layering na cross-section acid pickled macroscopic anụ ahụ nke billet ma ọ bụ. ígwè tube.
Nyocha na-adịghị emebi emebi
Dị ka arịrịọ nke onye ahụ na-achọsi ike, nke a na-emekọrịta n'etiti ndị na-enye ihe na ndị na-achọsi ike ma gosipụta na nkwekọrịta ahụ, enwere ike ịchọta ntụpọ ultrasonic n'otu n'otu maka tubes ígwè. Njọ akwụkwọ ntuziaka ogologo nke tube sample kwesịrị iru ihe achọrọ maka ọkwa nnabata post-elele C8 akọwapụtara na GB/T 5777-1996.
Nkọwa ngwaahịa
Igwe mmiri ọkụ dị elu
GB/T5310-2017
ASME SA-106/SA-106M-2015
ASTMA210 (A210M) -2012
ASME SA-213/SA-213M
