English
中文

China OEM China Ihowuliseyili Umbhobho Steel Engenamthungo

China OEM China Ihowuliseyili Umthungo Steel Umbhobho Featured Umfanekiso
  • China OEM China Ihowuliseyili Umbhobho Steel Engenamthungo
  • China OEM China Ihowuliseyili Umbhobho Steel Engenamthungo
  • China OEM China Ihowuliseyili Umbhobho Steel Engenamthungo

Inkcazelo emfutshane:

Iityhubhu zetsimbi ezingenamthungo ngeenjongo zesakhiwo, iityhubhu zentsimbi ezingenamthungo kwizakhiwo zoomatshini kwi-GB / 8162-2008 Standard. izinto eziphathekayo zibandakanya Umgangatho ophezulu we-carbon steel kunye nentsimbi ephantsi ye-alloy, njenge-10,20,35,45 kunye ne-Q345, Q460, Q490,42CrMo, 35CrMo.


  • Intlawulo:30% idiphozithi, 70% L/C okanye B/L ikopi okanye 100% L/C emehlweni
  • Min.Ubungakanani boMyalelo:I-PC eyi-1
  • Ukubonelela ngezakhono:Ngonyaka 20000 Tons Inventory of Steel Pipe
  • Ixesha lokukhokhela:7-14 iintsuku ukuba isitokhwe, 30-45 iintsuku ukuvelisa
  • Ukupakisha:Ukunyamalala okumnyama, i-bevel kunye ne-cap yombhobho ngamnye; I-OD engaphantsi kwe-219mm kufuneka ipakishwe kwi-bundle, kwaye ibhandle nganye ayidluli kwiitoni ezi-2.
    • Khuphela njengePDF

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Inkampani yethu ibandakanyeka ikakhulu kwishishini lokuthumela ngaphandle kweetyhubhu zentsimbi ezingenamthungo,China Steel Tube, i-SMLS yamaTshayina, Imibhobho yentsimbi engenamthungo, Iityhubhu zentsimbi ezingenamthungo, I-SMLS, I-SMLS yaseTshayina, Imibhobho yesakhiwo se-SMLS.

    Iimodeli ezininzi eziphambili zemveliso yetyhubhu eshushu eqengqelekayo engenamthungo
    1, Imibhobho yentsimbi eshushu

    ibe yimodeli yesiqhelo yemveliso yombhobho yentsimbi engenamthungo. Imibhobho emininzi eqhubekayo iteknoloji yokuqengqeleka.
    Xa kuthelekiswa nezinye iimodeli, ilitye lokusila eliqhubekayo libe lolona khetho lokuqala kumashishini okuvelisa ityhubhu yentsimbi enomthungo yehlabathi ngenxa yomgangatho wayo ophezulu, imveliso ephezulu, ukusebenza kakuhle, kunye nokusetyenziswa okuphantsi.
    2, I-3 roll eqhubekayo yombhobho wokusila

    wavula ixesha elitsha lobugcisa obuqhubekayo bombhobho wentsimbi
    Ukusukela ngo-2005, kukho iiseti ezingaphezu kwama-20 zee-3-roll eziqhubekayo zokusila ezakhiweyo kwaye zisakhiwa kwihlabathi liphela. Ukwakhiwa kwezi zixhobo zokusila kudale ixesha elitsha le-3-roll continuous rolling steel pipe technology.
    3. Umbhobho ojikelezayo ozenzekelayo, owaziwa ngokuba yiPlug mill
    Phakathi kwazo, ii-mills ezinkulu kunye neziphakathi ezizenzekelayo ezijikelezayo zidlala indima ebalulekileyo emva kokuguqulwa kobugcisa.
    4. I-Periodic pipe rolling Mill, eyaziwa ngokuba yiPilger mill

    ilungele ukuveliswa kodonga oluphakathi kunye nolungqindilili lwemibhobho yentsimbi emikhulu nephakathi. Yenye yeemodeli ezindala kwihlabathi
    Ngenxa yomgangatho ophantsi wemveliso kunye nomgangatho ophantsi womphezulu wangaphandle wale singqusho, iindleko zayo zemveliso kunye nomgangatho wemveliso kunzima ukukhuphisana nezinye izixhobo. Uninzi lwezingqusho ezincinci kunye neziphakathi ziphelisiwe. Ilitye lokusila ityhubhu enkulu ejikelezayo isenenzuzo ekuveliseni iityhubhu zentsimbi ezinobubanzi obukhulu ezinobubanzi obukhulu, ingakumbi ukuveliswa kweetyhubhu zesikhululo samandla ezinobubanzi obukhulu. Ii-periodic tube rolling Mills ziseyindlela esebenzayo, ngoko ke ziyagcinwa.
    5.Umatshini wokuqengqeleka wetyhubhu ochanekileyo, umatshini wokuqengqeleka we-3-roll
    Umatshini wokugoqa wetyhubhu ochanekileyo ukwabizwa ngokuba ngumatshini wokuqengqeleka ityhubhu ye-Accu2Roll, kwaye umatshini wokuqengqeleka ityhubhu ye-3-roll ukwabizwa ngokuba ngumatshini we-Assel. Ikwayintsimbi engenamthungo yokusila ityhubhu enokuchaneka okuphezulu. Ukucwangciswa kweenkqubo zangaphambili nangemva ngokusisiseko kufana ne-Accu2Roll tube mill ngaphandle kokuba i-stretcher isebenzisa i-3-roll cross-rolling.
    6. Abanye oomatshini bokuqengqeleka ityhubhu
    Ngaphandle kwe-China, ii-extruders, oomatshini bokukrazula imibhobho yobubanzi obukhulu, kunye noomatshini bokuqengqeleka be-skew kunye nokwandisa ubukhulu be-diameter banophuhliso olutsha oluncinci kwamanye amazwe ehlabathi. E-China, ngenxa yophuhliso olukhawulezayo lwemveliso yombhobho yentsimbi engenamthungo kunye nemfuno yeemveliso eziphezulu, ukwakhiwa kwezi zixhobo zokusila kuye kwenza uphuhliso olutsha.

    Wamkelekile ukuba undwendwele inkampani yethu, umzi-mveliso apho ubonisa iimveliso ezahlukeneyo eziya kuhlangabezana nolindelo lwakho. Okwangoku, kulungele ukutyelela iwebhusayithi yethu, kwaye abasebenzi bethu bokuthengisa baya kuzama konke okusemandleni abo ukukunika eyona nkonzo ilungileyo. Nceda uqhagamshelane nathi ukuba ufuna ulwazi oluthe kratya. Injongo yethu kukunceda abathengi baqonde iinjongo zabo. Senza iinzame ezinkulu ukuphumeza le meko yokuphumelela.

    Isishwankathelo

    Isicelo

    Isetyenziselwa ikakhulu ukwenza iCarbon Structural Steel, i-alloy Structural Steel kunye nezakhiwo zoomatshini.

    IBanga eliPhambili

    IBanga leCarbon Structural Steel: 10,20,35, 45,Q345,Q460,Q490,Q620, njl.

    IBanga leNsimbi yoLwakhiwo lwe-alloy: 42CrMo, 35CrMo, njl.

    ICandelo leMichiza

    IBanga leNsimbi

    Inqanaba lomgangatho

    Ukuqulunqwa kweekhemikhali

    C

    Si

    Mn

    P

    S

    Nb

    V

    Ti

    Cr

    Ni

    Cu

    Nd

    Mo

    B

    Als”

    akukho mkhulu kune

    hayi ngaphantsi kwe
    Q345 A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.30

    0.50

    0.20

    0.012

    0.10

    		 —- -
    B 0.035 0.035
    C 0.030 0.030

    0.07

    0.15

    0.20

    0.015
    D

    0.18

    		 0.030 0.025
    E 0.025 0.020
    Q390 A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.07

    0.20

    0.20

    0.3

    0.50

    0.20

    0.015

    0.10

    		 - -
    B 0.035 0.035
    C 0.030 0.030

    0,015
    D 0.030 0.025
    E 0.025 0.020
    Q42O A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.07

    0.2

    0.20

    0.30

    0.80

    0.20

    0.015

    0.20

    		 —-

    —-
    B 0.035 0.035
    C 0.030 0.030

    0.015
    D 0.030 0.025
    E 0.025 0.020
    Q46O C

    0.20

    0.60

    1.80

    		 0.030 0.030

    0.11

    0.20

    0.20

    0.30

    0.80

    0.20

    0.015

    0.20

    0.005

    0.015
    D 0.030 0.025
    E 0.025 0.020
    Q500 C

    0j8

    0.60

    1.80

    		 0.025 0.020

    0.11

    0.20

    0.20

    0.60

    0.80

    0.20

    0.015

    0.20

    0.005

    0.015
    D 0.025 0.015
    E 0.020 0.010
    Q550 C

    0.18

    0.60

    2.00

    		 0.025 0,020 0.11

    0.20

    0.20

    0.80

    0.80

    0.20

    0.015

    0.30

    0.005

    0.015
    D 0.025 0,015
    E 0.020 0.010
    Q62O C

    0.18

    0.60

    2.00

    		 0.025 0.020

    0.11

    0.20

    0.20

    1.00

    0.80

    0.20

    0.015

    0.30

    0.005

    0.015
    D 0.025 0.015
    E 0.020 0.010
    a.Ukongeza kwi-Q345A kunye ne-Q345B amabakala, intsimbi kufuneka iqulethe ubuncinane enye yezinto eziziinkozo ezicocekileyo i-Al, Nb, V, kunye ne-Ti. Ngokweemfuno, umthengisi unokongeza enye okanye ngaphezulu kwezinto eziziinkozo ezicocekileyo. Elona xabiso liphezulu liyakuba njengoko lichaziwe kwitheyibhile. Xa idibene, i-Nb + V + Ti ayikho ngaphezu kwe-0.22%b. Kwi-Q345, Q390, Q420 kunye ne-Q46O amabakala, i-Mo + Cr ayikho ngaphezu kwe-0.30%c. Xa i-Cr kunye ne-Ni yebakala ngalinye zisetyenziswa njengezinto ezishiyekileyo, umxholo we-Cr no-Ni akufanele ube mkhulu kune-0.30%; xa kuyimfuneko ukongeza, umxholo kufuneka uhlangabezane neemfuno kwitheyibhile okanye unqunywe ngumthengisi kunye nomthengi ngokubonisana.d. Ukuba umthengisi unokuqinisekisa ukuba umxholo we-nitrogen uhlangabezana neemfuno kwitheyibhile, uhlalutyo lomxholo we-nitrogen alunakwenziwa. Ukuba i-Al, i-Nb, i-V, i-Ti kunye nezinye izinto ze-alloy kunye nokulungiswa kwe-nitrogen zongezwa kwintsimbi, umxholo we-nitrogen awukhawulelwanga. Umxholo wokulungiswa kwenitrogen kufuneka ucaciswe kwisiqinisekiso somgangatho.e. Xa usebenzisa i-aluminium epheleleyo, umxholo we-aluminium opheleleyo Alt ≥ 0020%.

    IBanga

    ICarbon elingana ne-CEV (iqhezu lobunzima) /%

    Ubukhulu bodonga lwegama s≤ 16mm

    Ubukhulu bodonga lwegama S2>16 mm〜30 mm

    Ubukhulu bodonga lwegama S>30mm

    Ishushu iqengqeleke okanye iqhelekile

    Ukucima ＋ukucaphuka

    Ishushu iqengqeleke okanye iqhelekile

    Ukucima ＋ukucaphuka

    Ishushu iqengqeleke okanye iqhelekile

    Ukucima ＋ukucaphuka
    Q345

    <0.45

    -

    <0.47

    -

    <0.48

    一
    Q390

    <0.46

    一

    W0.48

    -

    <0.49

    -
    Q420

    <0.48

    一

    <0.50

    <0.48

    <0.52

    <0,48
    Q460

    <0.53

    <0.48

    W0.55

    <0.50

    <0.55

    W0.50
    Q500

    一

    <0.48

    一

    <0.50

    一

    W0.50
    Q550

    -

    <0.48

    .一

    <0.50

    一

    <0.50
    Q62O

    -

    <0.50

    -

    <0.52

    -

    W0.52
    Q690

    -

    		 <0.50

    -

    <0.52

    -

    W0.52

    IPropati yoomatshini

    Iipropathi zeMechanical ezikumgangatho ophezulu wekhabhoni yentsimbi yolwakhiwo kunye nemibhobho yentsimbi yolwakhiwo olusezantsi-amandla aphezulu

    IBanga Inqanaba lomgangatho Unikeze Amandla Amandla esivuno esisezantsi Ukunyuka emva kokuphuka Uvavanyo lwempembelelo
    Ubukhulu bodonga lwegama ubushushu Funxa amandla
    <16 mm >16 mm〜 〉30 mm
    30 mm
    hayi ngaphantsi kwe hayi ngaphantsi kwe
    10 - >335 205 195 185 24 - -
    15 - >375 225 215 205 22 - 一
    20 —- >410 245 235 225 20 - -
    25 - > 450 275 265 255 18 - -
    35 - >510 305 295 285 17 一 -
    45 - 2590 335 325 315 14 - -
    20Mn —• > 450 275 265 255 20 - 一
    25Mn - >490 295 285 275 18 - -
    Q345 A 470—630 345 325 295 20 - 一
    B 4~20 34
    C 21 0
    D -20
    E -40 27
    Q39O A 490—650 390 370 350 18
    B 20 34
    C 19 0
    D -20
    E -40 27
    Q42O A 520〜680 420 400 380 18
    B 20 34
    C 19 0
    D -20
    E -40 27
    Q46O C 550〜720 460 440 420 17 0 34
    D -20
    E -40 27
    Q500 C 610〜770 500 480 440 17 0 55
    D -20 47
    E -40 31
    Q550 C 670〜830 550 530 490 16 0 55
    D -20 47
    E -40 31
    Q62O C 710〜880 620 590 550 15 0 55
    D -20 47
    E -40 31
    Q690 C 770〜94. 690 660 620 14 0 55
    D -20 47
    E -40 31

    Iimpawu zomatshini wemibhobho yensimbi ye-alloy

    NO IBanga Ulawulo lonyango olucetyiswayo Iimpawu zokuqina Umbhobho wentsimbi ene-anealed okanye ubushushu obuphezulu obupholileyo Imeko yonikezelo Ubulukhuni beBrinell HBW
    Ukucinywa (okuqhelekileyo) Ukufudumeza Yield StrengthMPa Amandla e-Tensile MPa Ukwandiswa emva kokwaphulwa kwe-A%
    ubushushu Ukupholisa Ubushushu Ukupholisa
    Okokuqala Isibini hayi ngaphantsi kwe akukho mkhulu kune
    1 40Mn2 840 Amanzi, ioli 540 Amanzi, ioli 885 735 12 217
    2 45Mn2 840 Amanzi, ioli 550 Amanzi, ioli 885 735 10 217
    3 27SiMn 920 Amanzi 450 Amanzi, ioli 980 835 12 217
    4 40MnBc 850 ioli 500 Amanzi, ioli 980 785 10 207
    5 45MnBc 840 ioli 500 Amanzi, ioli 1030 835 9 217
    6 20Mn2bc'f 880 ioli 200 Amanzi, umoya 980 785 10 187
    7 20CrdJ 880 800 Amanzi, ioli 200 Amanzi, umoya 835 540 10 179
    785 490 10 179
    8 30Cr 860 ioli 500 Amanzi, ioli 885 685 11 187
    9 35Kr 860 ioli 500 Amanzi, ioli 930 735 11 207
    10 40Cr 850 ioli 520 Amanzi, ioli 980 785 9 207
    11 45Cr 840 ioli 520 Amanzi, ioli 1030 835 9 217
    12 50Cr 830 ioli 520 Amanzi, ioli 1080 930 9 229
    13 38CrSi 900 ioli 600 Amanzi, ioli 980 835 12 255
    14 20CrModJ 880 Amanzi, ioli 500 Amanzi, ioli 885 685 11 197
    845 635 12 197
    15 35CrMo 850 ioli 550 Amanzi, ioli 980 835 12 229
    16 42CrMo 850 ioli 560 Amanzi, ioli 1080 930 12 217
    17 38CrMoAld 940 Amanzi, ioli 640 Amanzi, ioli 980 835 12 229
    930 785 14 229
    18 50CrVA 860 ioli 500 Amanzi, ioli 1 275 1 130 10 255
    19 2OCrMn 850 ioli 200 Amanzi, umoya 930 735 10 187
    20 20CrMnSif 880 ioli 480 Amanzi, ioli 785 635 12 207
    21 3OCrMnSif 880 ioli 520 Amanzi, ioli 1080 885 8 229
    980 835 10 229
    22 35CrMnSiA£ 880 ioli 230 Amanzi, umoya 1 620 9 229
    23 20CrMnTie-f 880 870 ioli 200 Amanzi, umoya 1080 835 10 217
    24 30CrMnTie*f 880 850 ioli 200 Amanzi, umoya 1 470 9 229
    25 12CrNi2 860 780 Amanzi, ioli 200 Amanzi, umoya 785 590 12 207
    26 12CrNi3 860 780 ioli 200 Amanzi, umoya 930 685 11 217
    27 12Cr2Ni4 860 780 ioli 200 Amanzi, umoya 1080 835 10 269
    28 40CrNiMoA 850 —- ioli 600 Amanzi, umoya 980 835 12 269
    29 45CrNiMoVA 860 - ioli 460 ioli 1 470 1 325 7 269
    a. Ulungelelwaniso oluvumelekileyo uluhlu lobushushu bonyango oludweliswe kwitheyibhile: ukucima ± 15 ℃, ubushushu obuphantsi bobushushu ± 20 ℃, ubushushu obuphezulu bomhlaba obushushu buyi-50 ℃.b. Kuvavanyo lwe-tensile, iisampulu ezinqamlezayo okanye ezinde zinokuthathwa. Kwimeko yokungavumelani, isampuli yelongitudinal isetyenziswa njengesiseko solamlo.c. Insimbi ene-Boron inokuba yinto eqhelekileyo ngaphambi kokucima, kwaye ukushisa okuqhelekileyo akufanele kube phezulu kunokushisa kwayo.d. Ukuhanjiswa ngokweseti yedatha echazwe ngumfaki-sicelo. Xa umceli engakhange achaze, ukuhanjiswa kungenziwa ngokuhambelana nayiphi na idatha.e. Ukucima kokuqala kwentsimbi ye-titanium kunye ne-Ming Meng kunokutshintshwa ngokuqhelekileyo.

    f. Ukucima i-Isothermal kwi-280 C ~320 C.

    g. Kuvavanyo lwe-tensile, ukuba i-Rel ayinakulinganiswa, i-Rp0.2 inokulinganiswa endaweni ye-Rel.

     

    Imfuneko yoVavanyo

    Ukwenziwa kweekhemikhali:

    Ukolula, Ubulukhuni, Umothuko, Umngqusho, Ukugoba, uvavanyo lwe-Ultrasonic, iEddy yangoku, ukubhaqwa, ukubhaqwa okuvuzayo, iGalvanized

    Iinkcukacha zeMveliso

    Imibhobho yoomatshini/yoMchiza kunye nezichumiso


    GB/T 8162-2008


    I-ASTM A519-2006


    I-BS EN 10210-1-2006


    I-ASTM A53/A53M-2012


    GB 9948-2006


    GB 6479-2013


    GB/T 17396-2009

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi
    Cofa u-enter ukukhangela okanye i-ESC ukuvala