English
中文

Umzi-mveliso oLungiselelweyo waseTshayina Ukuchaneka ongenamthungo wentsimbi odityanisiweyo / Umbhobho wentsimbi weKhabhoni oPhantsi

Umzi-mveliso waseTshayina oCwangcisiweyo Ukuchaneka ongenamthungo wentsimbi odityanisiweyo
  • Umzi-mveliso oLungiselelweyo waseTshayina Ukuchaneka ongenamthungo wentsimbi odityanisiweyo / Umbhobho wentsimbi weKhabhoni oPhantsi
  • Umzi-mveliso oLungiselelweyo waseTshayina Ukuchaneka ongenamthungo wentsimbi odityanisiweyo / Umbhobho wentsimbi weKhabhoni oPhantsi
  • Umzi-mveliso oLungiselelweyo waseTshayina Ukuchaneka ongenamthungo wentsimbi odityanisiweyo / Umbhobho wentsimbi weKhabhoni oPhantsi

Inkcazelo emfutshane:

Iityhubhu zetsimbi ezingenamthungo ngeenjongo zesakhiwo, iityhubhu zentsimbi ezingenamthungo kwizakhiwo zoomatshini kwi-GB / 8162-2008 Standard. izinto eziphathekayo zibandakanya Umgangatho ophezulu we-carbon steel kunye nentsimbi ephantsi ye-alloy, njenge-10,20,35,45 kunye ne-Q345, Q460, Q490,42CrMo, 35CrMo.


  • Intlawulo:30% idiphozithi, 70% L/C okanye B/L ikopi okanye 100% L/C emehlweni
  • Min.Ubungakanani boMyalelo:I-PC eyi-1
  • Ukubonelela ngezakhono:Ngonyaka 20000 Tons Inventory of Steel Pipe
  • Ixesha lokukhokhela:7-14 iintsuku ukuba isitokhwe, 30-45 iintsuku ukuvelisa
  • Ukupakisha:Ukunyamalala okumnyama, i-bevel kunye ne-cap yombhobho ngamnye; I-OD engaphantsi kwe-219mm kufuneka ipakishwe kwi-bundle, kwaye ibhandle nganye ayidluli kwiitoni ezi-2.
    • Khuphela njengePDF

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Isishwankathelo

    Ukuhlangabezana nolonwabo olulindelwe ngabathengi, sineqela lethu elomeleleyo lokubonelela ngeyona nkonzo ingcono iyonke ebandakanya intengiso kunye nokuthengisa, ukuthengisa imveliso, ukuyila, ukuvelisa, ukulawula umgangatho olungileyo, ukupakisha, ugcino kunye nolungiselelo lweTube yentsimbi engenamthungo eWelded/ Umbhobho wentsimbi yeCarbon Mild Low, injongo yethu "kumlilo omtsha womgangatho, ixabiso elidlulayo", kwithuba elizayo, siyakumema ngokunyanisekileyo ukuba uphucule ngokuqinisekileyo kunye nathi kwaye wenze ixesha elide elikhanyayo kunye! Inkampani yethu yakhe ubudlelwane beshishini obuzinzileyo kunye neenkampani ezininzi ezaziwayo zasekhaya kunye nabathengi baphesheya. Ngenjongo yokubonelela ngeemveliso ezikumgangatho ophezulu kunye nezisombululo kubathengi kwiibhedi eziphantsi, sizibophelele ekuphuculeni amandla ayo kuphando, uphuhliso, ukwenziwa kunye nolawulo. Sinelunda ukufumana ulwamkelo kubathengi bethu. Ukuza kuthi ga ngoku siphumelele i-ISO9001in 2005 kunye ne-ISO/TS16949 ngo-2008. Amashishini "omgangatho wokuphila, ukuthembeka kophuhliso" ngenjongo, bamkele ngokunyanisekileyo oosomashishini basekhaya nabangaphandle ukuba bandwendwele ukuze baxoxe ngentsebenziswano.

    I-ASTM A672 ngumgangatho oqhelekileyo wombhobho odityanisiweyo we-electrofusion ephezulu. Uluhlu lobushushu bezinto ezidweliswe kumgangatho ukusuka kwi-20 ° C ukuya kwi -195 ° C. Ke ngoko, umgangatho we-A672 uhlala usetyenziselwa imibhobho edityanisiweyo yobushushu obuphantsi. Phakathi kwabo, i-CC60 CL22 yinto esetyenziswa ngokuqhelekileyo i-low-temperature material, eyenziwe nge-A516GR.60 ephakathi kunye neqondo eliphantsi loxinzelelo lwesitya se-carbon steel plates. Yinto ebalulekileyo kwimibhobho edibeneyo yombane. Ubushushu bokuvavanya impembelelo bufuneka ukuba bube -50 ° C, obunokuthi buthathelwe indawo yi-Q345R yaseTshayina. Ukwakhiwa kweekhemikhali kunye neempawu zoomatshini zezi zimbini ziyafana:
    CC60:
    C: 0.23%; Mnu: 0.55% ~ 1.3%; Si: 0,13% ~ 0.45%; P: 0,025% S: 0,025
    Amandla okuqina: 415 ~ 550Mpa
    Amandla esivuno: 220Mpa
    Elongation: 21%

    Q345R:
    C: 0.22%; Mnu: 1.6%; Si: 0.55%; P: 0,025% S: 0,025
    Amandla okuqina: 470 ~ 630Mpa
    Amandla esivuno: 345Mpa
    Elongation: 21%

    Isicelo

    Isetyenziselwa ikakhulu ukwenza iCarbon Structural Steel, i-alloy Structural Steel kunye nezakhiwo zoomatshini.

    IBanga eliPhambili

    IBanga leCarbon Structural Steel: 10,20,35, 45,Q345,Q460,Q490,Q620, njl.

    IBanga leNsimbi yoLwakhiwo lwe-alloy: 42CrMo, 35CrMo, njl.

    ICandelo leMichiza

    IBanga leNsimbi

    Inqanaba lomgangatho

    Ukuqulunqwa kweekhemikhali

    C

    Si

    Mn

    P

    S

    Nb

    V

    Ti

    Cr

    Ni

    Cu

    Nd

    Mo

    B

    Als"

    akukho mkhulu kune

    hayi ngaphantsi kwe
    Q345 A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.30

    0.50

    0.20

    0.012

    0.10

    		 —- -
    B 0.035 0.035
    C 0.030 0.030

    0.07

    0.15

    0.20

    0.015
    D

    0.18

    		 0.030 0.025
    E 0.025 0.020
    Q390 A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.07

    0.20

    0.20

    0.3

    0.50

    0.20

    0.015

    0.10

    		 - -
    B 0.035 0.035
    C 0.030 0.030

    0,015
    D 0.030 0.025
    E 0.025 0.020
    Q42O A

    0.20

    0.50

    1.70

    		 0.035 0.035

    0.07

    0.2

    0.20

    0.30

    0.80

    0.20

    0.015

    0.20

    		 —-

    —-
    B 0.035 0.035
    C 0.030 0.030

    0.015
    D 0.030 0.025
    E 0.025 0.020
    Q46O C

    0.20

    0.60

    1.80

    		 0.030 0.030

    0.11

    0.20

    0.20

    0.30

    0.80

    0.20

    0.015

    0.20

    0.005

    0.015
    D 0.030 0.025
    E 0.025 0.020
    Q500 C

    0j8

    0.60

    1.80

    		 0.025 0.020

    0.11

    0.20

    0.20

    0.60

    0.80

    0.20

    0.015

    0.20

    0.005

    0.015
    D 0.025 0.015
    E 0.020 0.010
    Q550 C

    0.18

    0.60

    2.00

    		 0.025 0,020 0.11

    0.20

    0.20

    0.80

    0.80

    0.20

    0.015

    0.30

    0.005

    0.015
    D 0.025 0,015
    E 0.020 0.010
    Q62O C

    0.18

    0.60

    2.00

    		 0.025 0.020

    0.11

    0.20

    0.20

    1.00

    0.80

    0.20

    0.015

    0.30

    0.005

    0.015
    D 0.025 0.015
    E 0.020 0.010
    a.Ukongeza kwi-Q345A kunye ne-Q345B amabakala, intsimbi kufuneka iqulethe ubuncinane enye yezinto eziziinkozo ezicocekileyo i-Al, Nb, V, kunye ne-Ti. Ngokweemfuno, umthengisi unokongeza enye okanye ngaphezulu kwezinto eziziinkozo ezicocekileyo. Elona xabiso liphezulu liyakuba njengoko lichaziwe kwitheyibhile. Xa idibene, i-Nb + V + Ti ayikho ngaphezu kwe-0.22%b. Kwi-Q345, Q390, Q420 kunye ne-Q46O amabakala, i-Mo + Cr ayikho ngaphezu kwe-0.30%c. Xa i-Cr kunye ne-Ni yebakala ngalinye zisetyenziswa njengezinto ezishiyekileyo, umxholo we-Cr no-Ni akufanele ube mkhulu kune-0.30%; xa kuyimfuneko ukongeza, umxholo kufuneka uhlangabezane neemfuno kwitheyibhile okanye unqunywe ngumthengisi kunye nomthengi ngokubonisana.d. Ukuba umthengisi unokuqinisekisa ukuba umxholo we-nitrogen uhlangabezana neemfuno kwitheyibhile, uhlalutyo lomxholo we-nitrogen alunakwenziwa. Ukuba i-Al, i-Nb, i-V, i-Ti kunye nezinye izinto ze-alloy kunye nokulungiswa kwe-nitrogen zongezwa kwintsimbi, umxholo we-nitrogen awukhawulelwanga. Umxholo wokulungiswa kwenitrogen kufuneka ucaciswe kwisiqinisekiso somgangatho.e. Xa usebenzisa i-aluminium epheleleyo, umxholo we-aluminium opheleleyo Alt ≥ 0020%.

    IBanga

    ICarbon elingana ne-CEV (iqhezu lobunzima) /%

    Ubukhulu bodonga lwegama s≤ 16mm

    Ubukhulu bodonga lwegama S2>16 mm〜30 mm

    Ubukhulu bodonga lwegama S>30mm

    Ishushu iqengqeleke okanye iqhelekile

    Ukucima ＋ukucaphuka

    Ishushu iqengqeleke okanye iqhelekile

    Ukucima ＋ukucaphuka

    Ishushu iqengqeleke okanye iqhelekile

    Ukucima ＋ukucaphuka
    Q345

    <0.45

    -

    <0.47

    -

    <0.48

    一
    Q390

    <0.46

    一

    W0.48

    -

    <0.49

    -
    Q420

    <0.48

    一

    <0.50

    <0.48

    <0.52

    <0,48
    Q460

    <0.53

    <0.48

    W0.55

    <0.50

    <0.55

    W0.50
    Q500

    一

    <0.48

    一

    <0.50

    一

    W0.50
    Q550

    -

    <0.48

    .一

    <0.50

    一

    <0.50
    Q62O

    -

    <0.50

    -

    <0.52

    -

    W0.52
    Q690

    -

    		 <0.50

    -

    <0.52

    -

    W0.52

    IPropati yoomatshini

    Iipropathi zeMechanical ezikumgangatho ophezulu wekhabhoni yentsimbi yolwakhiwo kunye nemibhobho yentsimbi yolwakhiwo olusezantsi-amandla aphezulu

    IBanga Inqanaba lomgangatho Unikeze Amandla Amandla esivuno esisezantsi Ukunyuka emva kokuphuka Uvavanyo lwempembelelo
    Ubukhulu bodonga lwegama ubushushu Funxa amandla
    <16 mm >16 mm〜 〉30 mm
    30 mm
    hayi ngaphantsi kwe hayi ngaphantsi kwe
    10 - >335 205 195 185 24 - -
    15 - >375 225 215 205 22 - 一
    20 —- >410 245 235 225 20 - -
    25 - > 450 275 265 255 18 - -
    35 - >510 305 295 285 17 一 -
    45 - 2590 335 325 315 14 - -
    20Mn —• > 450 275 265 255 20 - 一
    25Mn - >490 295 285 275 18 - -
    Q345 A 470—630 345 325 295 20 - 一
    B 4~20 34
    C 21 0
    D -20
    E -40 27
    Q39O A 490—650 390 370 350 18
    B 20 34
    C 19 0
    D -20
    E -40 27
    Q42O A 520〜680 420 400 380 18
    B 20 34
    C 19 0
    D -20
    E -40 27
    Q46O C 550〜720 460 440 420 17 0 34
    D -20
    E -40 27
    Q500 C 610〜770 500 480 440 17 0 55
    D -20 47
    E -40 31
    Q550 C 670〜830 550 530 490 16 0 55
    D -20 47
    E -40 31
    Q62O C 710〜880 620 590 550 15 0 55
    D -20 47
    E -40 31
    Q690 C 770〜94. 690 660 620 14 0 55
    D -20 47
    E -40 31

    Iimpawu zomatshini wemibhobho yensimbi ye-alloy

    NO IBanga Ulawulo lonyango olucetyiswayo Iimpawu zokuqina Umbhobho wentsimbi ene-anealed okanye ubushushu obuphezulu obupholileyo Imeko yonikezelo Ubulukhuni beBrinell HBW
    Ukucinywa (okuqhelekileyo) Ukufudumeza Yield StrengthMPa Amandla e-Tensile MPa Ukwandiswa emva kokwaphulwa kwe-A%
    ubushushu Ukupholisa Ubushushu Ukupholisa
    Okokuqala Isibini hayi ngaphantsi kwe akukho mkhulu kune
    1 40Mn2 840 Amanzi, ioli 540 Amanzi, ioli 885 735 12 217
    2 45Mn2 840 Amanzi, ioli 550 Amanzi, ioli 885 735 10 217
    3 27SiMn 920 Amanzi 450 Amanzi, ioli 980 835 12 217
    4 40MnBc 850 ioli 500 Amanzi, ioli 980 785 10 207
    5 45MnBc 840 ioli 500 Amanzi, ioli 1030 835 9 217
    6 20Mn2bc'f 880 ioli 200 Amanzi, umoya 980 785 10 187
    7 20CrdJ 880 800 Amanzi, ioli 200 Amanzi, umoya 835 540 10 179
    785 490 10 179
    8 30Cr 860 ioli 500 Amanzi, ioli 885 685 11 187
    9 35Kr 860 ioli 500 Amanzi, ioli 930 735 11 207
    10 40Cr 850 ioli 520 Amanzi, ioli 980 785 9 207
    11 45Cr 840 ioli 520 Amanzi, ioli 1030 835 9 217
    12 50Cr 830 ioli 520 Amanzi, ioli 1080 930 9 229
    13 38CrSi 900 ioli 600 Amanzi, ioli 980 835 12 255
    14 20CrModJ 880 Amanzi, ioli 500 Amanzi, ioli 885 685 11 197
    845 635 12 197
    15 35CrMo 850 ioli 550 Amanzi, ioli 980 835 12 229
    16 42CrMo 850 ioli 560 Amanzi, ioli 1080 930 12 217
    17 38CrMoAld 940 Amanzi, ioli 640 Amanzi, ioli 980 835 12 229
    930 785 14 229
    18 50CrVA 860 ioli 500 Amanzi, ioli 1 275 1 130 10 255
    19 2OCrMn 850 ioli 200 Amanzi, umoya 930 735 10 187
    20 20CrMnSif 880 ioli 480 Amanzi, ioli 785 635 12 207
    21 3OCrMnSif 880 ioli 520 Amanzi, ioli 1080 885 8 229
    980 835 10 229
    22 35CrMnSiA£ 880 ioli 230 Amanzi, umoya 1 620 9 229
    23 20CrMnTie-f 880 870 ioli 200 Amanzi, umoya 1080 835 10 217
    24 30CrMnTie*f 880 850 ioli 200 Amanzi, umoya 1 470 9 229
    25 12CrNi2 860 780 Amanzi, ioli 200 Amanzi, umoya 785 590 12 207
    26 12CrNi3 860 780 ioli 200 Amanzi, umoya 930 685 11 217
    27 12Cr2Ni4 860 780 ioli 200 Amanzi, umoya 1080 835 10 269
    28 40CrNiMoA 850 —- ioli 600 Amanzi, umoya 980 835 12 269
    29 45CrNiMoVA 860 - ioli 460 ioli 1 470 1 325 7 269
    a. Ulungelelwaniso oluvumelekileyo uluhlu lobushushu bonyango oludweliswe kwitheyibhile: ukucima ± 15 ℃, ubushushu obuphantsi bobushushu ± 20 ℃, ubushushu obuphezulu bomhlaba obushushu buyi-50 ℃.b. Kuvavanyo lwe-tensile, iisampulu ezinqamlezayo okanye ezinde zinokuthathwa. Kwimeko yokungavumelani, isampuli yelongitudinal isetyenziswa njengesiseko solamlo.c. Insimbi ene-Boron inokuba yinto eqhelekileyo ngaphambi kokucima, kwaye ukushisa okuqhelekileyo akufanele kube phezulu kunokushisa kwayo.d. Ukuhanjiswa ngokweseti yedatha echazwe ngumfaki-sicelo. Xa umceli engakhange achaze, ukuhanjiswa kungenziwa ngokuhambelana nayiphi na idatha.

    e. Ukucima kokuqala kwentsimbi ye-titanium kunye ne-Ming Meng kunokutshintshwa ngokuqhelekileyo.

    f. Ukucima i-Isothermal kwi-280 C ~320 C.

    g. Kuvavanyo lwe-tensile, ukuba i-Rel ayinakulinganiswa, i-Rp0.2 inokulinganiswa endaweni ye-Rel.

     

    Imfuneko yoVavanyo

    Ukwenziwa kweekhemikhali:

    Ukolula, Ubulukhuni, Umothuko, Umngqusho, Ukugoba, uvavanyo lwe-Ultrasonic, iEddy yangoku, ukubhaqwa, ukubhaqwa okuvuzayo, iGalvanized

    Iinkcukacha zeMveliso

    Imibhobho yoomatshini/yoMchiza kunye nezichumiso


    GB/T 8162-2008


    I-ASTM A519-2006


    I-BS EN 10210-1-2006


    I-ASTM A53/A53M-2012


    GB 9948-2006


    GB 6479-2013


    GB/T 17396-2009

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi
    Cofa u-enter ukukhangela okanye i-ESC ukuvala