Ubonelelo lweFactory yaseTshayina i-China yoBubushushu obuPhezulu bengxubevange yoMbhobho ongenamthungo/ uMvelisi wemibhobho kunye noMboneleli

Ubonelelo ngeFactory China High lobushushu ingxubevange ingxubevange ithubhu ingenamthungo / umbhobho

Inkcazelo emfutshane:

Iityhubhu zetsimbi ezingenamthungo ngeenjongo zesakhiwo, iityhubhu zentsimbi ezingenamthungo kwizakhiwo zoomatshini kwi-GB / 8162-2008 Standard. izinto eziphathekayo zibandakanya Umgangatho ophezulu we-carbon steel kunye nentsimbi ephantsi ye-alloy, njenge-10,20,35,45 kunye ne-Q345, Q460, Q490,42CrMo, 35CrMo.

Intlawulo:30% idiphozithi, 70% L/C okanye B/L ikopi okanye 100% L/C emehlweni

Min.Ubungakanani boMyalelo:I-PC eyi-1

Ukubonelela ngezakhono:Ngonyaka 20000 Tons Inventory of Steel Pipe

Ixesha lokukhokhela:7-14 iintsuku ukuba isitokhwe, 30-45 iintsuku ukuvelisa

Ukupakisha:Ukunyamalala okumnyama, i-bevel kunye ne-cap yombhobho ngamnye; I-OD engaphantsi kwe-219mm kufuneka ipakishwe kwi-bundle, kwaye ibhandle nganye ayidluli kwiitoni ezi-2.

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isishwankathelo

Ifemu yethu ukusukela oko yasekwayo, idla ngokujonga umgangatho ophezulu njengobomi benkampani, isoloko iphucula itekhnoloji yokuvelisa, iphucula imveliso egqwesileyo kwaye yomeleza ngokuphindaphindiweyo intlangano yolawulo lomgangatho olungileyo, ngokuhambelana ngqongqo nomgangatho wesizwe we-ISO 9001:2000 we-High Temperature Alloy Seamless. Umbhobho / Umbhobho, Umgangatho olungileyo kunye namaxabiso akhuphisanayo enza iimveliso zethu zonwabele udumo oluphezulu kulo lonke igama. Ukuthembeka yeyona nto iphambili, kwaye inkonzo yeyona nto ibalulekileyo. Siyathembisa ngoku sinakho ukubonelela ngomgangatho ogqwesileyo kunye neemveliso zexabiso elifanelekileyo kubathengi. Nathi, ukhuseleko lwakho luqinisekisiwe.

I-SCM415 ibakala lensimbi yaseJapan, elilingana ne-15CrMo yamabanga asekhaya kunye ne-15CrMo4 ye-ISO-693-17-1999. Intsimbi yintsimbi yentsimbi ephantsi kwekhabhoni enamandla ashushu aphezulu kunye nokumelana ne-oxidation, kunye neempawu ezilungileyo ezibanzi zoomatshini. I-alloy structural iron, esetyenziswa kwiibhoyila kunye nee turbines zomphunga kwiityhubhu ze-superheater, iityhubhu zomphunga kunye nokufakwa okuhambelanayo kweebhoyila ezinoxinzelelo oluphezulu ngaphantsi kwe-530 ℃.

I-SCM415 yeCandelo leMichiza:

C: 0.13-0.18

Si: 0.15-0.35

Mnu: 0.60-0.85

P: 0.03 以下

S:0.03以下

Ubukhulu: 0.9-1.2

Mo: 0.15-0.3

iPropati ye-SCM415 yoomatshini:

Amandla okuqina σb (MPa): ≥440(45)
Amandla esivuno σs (MPa): ≥295(30)
Ubude δ5 (%): ≥22

I-15CrMo Chemical Component:

C: 0.12 ~ 0.18
Mnu: 0,40 ~ 0,70
Si: 0.17 ~ 0.37
Cr: 0.80 ~ 1.10
Mo: 0.40 ~ 0.55
Ni: ≤0.30
S: ≤0.035
P: ≤0.035

15CrMo iPropati yeMechanical:

Amandla e-Tensile MPa: 440 ~ 640
Indawo yesivuno MPa: 295
Ukwandiswa (%): 22

Sinokufumana i-15CrMo kunye ne-SCM415 iyafana, akukho mfuneko ikhethekileyo, ezi zimbini zinokuthatha indawo enye

Isicelo

Isetyenziselwa ikakhulu ukwenza iCarbon Structural Steel, i-alloy Structural Steel kunye nezakhiwo zoomatshini.

IBanga eliPhambili

IBanga leCarbon Structural Steel: 10,20,35, 45,Q345,Q460,Q490,Q620, njl.

IBanga leNsimbi yoLwakhiwo lwe-alloy: 42CrMo, 35CrMo, njl.

ICandelo leMichiza

IBanga leNsimbi	Inqanaba lomgangatho	Ukuqulunqwa kweekhemikhali
		C	Si	Mn	P	S	Nb	V	Ti	Cr	Ni	Cu	Nd	Mo	B	Als"
		akukho mkhulu kune														hayi ngaphantsi kwe
Q345	A	0.20	0.50	1.70	0.035	0.035				0.30	0.50	0.20	0.012	0.10	—-	-
	B				0.035	0.035
	C				0.030	0.030	0.07	0.15	0.20							0.015
	D	0.18			0.030	0.025
	E				0.025	0.020
Q390	A	0.20	0.50	1.70	0.035	0.035	0.07	0.20	0.20	0.3	0.50	0.20	0.015	0.10	-	-
	B				0.035	0.035
	C				0.030	0.030										0,015
	D				0.030	0.025
	E				0.025	0.020
Q42O	A	0.20	0.50	1.70	0.035	0.035	0.07	0.2	0.20	0.30	0.80	0.20	0.015	0.20	—-	—-
	B				0.035	0.035
	C				0.030	0.030										0.015
	D				0.030	0.025
	E				0.025	0.020
Q46O	C	0.20	0.60	1.80	0.030	0.030	0.11	0.20	0.20	0.30	0.80	0.20	0.015	0.20	0.005	0.015
	D				0.030	0.025
	E				0.025	0.020
Q500	C	0j8	0.60	1.80	0.025	0.020	0.11	0.20	0.20	0.60	0.80	0.20	0.015	0.20	0.005	0.015
	D				0.025	0.015
	E				0.020	0.010
Q550	C	0.18	0.60	2.00	0.025	0,020	0.11	0.20	0.20	0.80	0.80	0.20	0.015	0.30	0.005	0.015
	D				0.025	0,015
	E				0.020	0.010
Q62O	C	0.18	0.60	2.00	0.025	0.020	0.11	0.20	0.20	1.00	0.80	0.20	0.015	0.30	0.005	0.015
	D				0.025	0.015
	E				0.020	0.010
^a.^{Ukongeza kwi-Q345A kunye ne-Q345B amabakala, intsimbi kufuneka iqulethe ubuncinane enye yezinto eziziinkozo ezicocekileyo i-Al, Nb, V, kunye ne-Ti. Ngokweemfuno, umthengisi unokongeza enye okanye ngaphezulu kwezinto eziziinkozo ezicocekileyo. Elona xabiso liphezulu liyakuba njengoko lichaziwe kwitheyibhile. Xa idibene, i-Nb + V + Ti ayikho ngaphezu kwe-0.22%}^{b. Kwi-Q345, Q390, Q420 kunye ne-Q46O amabakala, i-Mo + Cr ayikho ngaphezu kwe-0.30%}^{c. Xa i-Cr kunye ne-Ni yebakala ngalinye zisetyenziswa njengezinto ezishiyekileyo, umxholo we-Cr no-Ni akufanele ube mkhulu kune-0.30%; xa kuyimfuneko ukongeza, umxholo kufuneka uhlangabezane neemfuno kwitheyibhile okanye unqunywe ngumthengisi kunye nomthengi ngokubonisana.}^{d. Ukuba umthengisi unokuqinisekisa ukuba umxholo we-nitrogen uhlangabezana neemfuno kwitheyibhile, uhlalutyo lomxholo we-nitrogen alunakwenziwa. Ukuba i-Al, i-Nb, i-V, i-Ti kunye nezinye izinto ze-alloy kunye nokulungiswa kwe-nitrogen zongezwa kwintsimbi, umxholo we-nitrogen awukhawulelwanga. Umxholo wokulungiswa kwenitrogen kufuneka ucaciswe kwisiqinisekiso somgangatho.}^{e. Xa usebenzisa i-aluminium epheleleyo, umxholo we-aluminium opheleleyo Alt ≥ 0020%.}

IBanga	ICarbon elingana ne-CEV (iqhezu lobunzima) /%
	Ubukhulu bodonga lwegama s≤ 16mm		Ubukhulu bodonga lwegama S2>16 mm〜30 mm		Ubukhulu bodonga lwegama S>30mm
	Ishushu iqengqeleke okanye iqhelekile	Ukucima ＋ukucaphuka	Ishushu iqengqeleke okanye iqhelekile	Ukucima ＋ukucaphuka	Ishushu iqengqeleke okanye iqhelekile	Ukucima ＋ukucaphuka
Q345	<0.45	-	<0.47	-	<0.48	一
Q390	<0.46	一	W0.48	-	<0.49	-
Q420	<0.48	一	<0.50	<0.48	<0.52	<0,48
Q460	<0.53	<0.48	W0.55	<0.50	<0.55	W0.50
Q500	一	<0.48	一	<0.50	一	W0.50
Q550	-	<0.48	.一	<0.50	一	<0.50
Q62O	-	<0.50	-	<0.52	-	W0.52
Q690	-	<0.50	-	<0.52	-	W0.52

IPropati yoomatshini

Iipropathi zeMechanical ezikumgangatho ophezulu wekhabhoni yentsimbi yolwakhiwo kunye nemibhobho yentsimbi yolwakhiwo olusezantsi-amandla aphezulu

IBanga	Inqanaba lomgangatho	Unikeze Amandla	Amandla esivuno esisezantsi			Ukunyuka emva kokuphuka	Uvavanyo lwempembelelo

			Ubukhulu bodonga lwegama				ubushushu	Funxa amandla
			<16 mm	>16 mm〜	〉30 mm

				30 mm
			hayi ngaphantsi kwe					hayi ngaphantsi kwe
10	-	>335	205	195	185	24	-	-
15	-	>375	225	215	205	22	-	一
20	—-	>410	245	235	225	20	-	-
25	-	> 450	275	265	255	18	-	-
35	-	>510	305	295	285	17	一	-
45	-	2590	335	325	315	14	-	-
20Mn	—•	> 450	275	265	255	20	-	一
25Mn	-	>490	295	285	275	18	-	-
Q345	A	470—630	345	325	295	20	-	一
	B						4~20	34
	C					21	0
	D						-20
	E						-40	27
Q39O	A	490—650	390	370	350	18
	B						20	34
	C					19	0
	D						-20
	E						-40	27
Q42O	A	520〜680	420	400	380	18
	B						20	34
	C					19	0
	D						-20
	E						-40	27
Q46O	C	550〜720	460	440	420	17	0	34
	D						-20
	E						-40	27
Q500	C	610〜770	500	480	440	17	0	55
	D						-20	47
	E						-40	31
Q550	C	670〜830	550	530	490	16	0	55
	D						-20	47
	E						-40	31
Q62O	C	710〜880	620	590	550	15	0	55
	D						-20	47
	E						-40	31
Q690	C	770〜94.	690	660	620	14	0	55
	D						-20	47
	E						-40	31

Iimpawu zomatshini wemibhobho yensimbi ye-alloy

NO	IBanga	Ulawulo lonyango olucetyiswayo					Iimpawu zokuqina			Umbhobho wentsimbi ene-anealed okanye ubushushu obuphezulu obupholileyo Imeko yonikezelo Ubulukhuni beBrinell HBW
		Ukucinywa (okuqhelekileyo)			Ukufudumeza		Yield StrengthMPa	Amandla e-Tensile MPa	Ukwandiswa emva kokwaphulwa kwe-A%
		ubushushu		Ukupholisa	Ubushushu	Ukupholisa	Yield StrengthMPa	Amandla e-Tensile MPa	Ukwandiswa emva kokwaphulwa kwe-A%
		Okokuqala	Isibini	Ukupholisa	Ubushushu	Ukupholisa	hayi ngaphantsi kwe			akukho mkhulu kune
1	40Mn2	840		Amanzi, ioli	540	Amanzi, ioli	885	735	12	217
2	45Mn2	840		Amanzi, ioli	550	Amanzi, ioli	885	735	10	217
3	27SiMn	920		Amanzi	450	Amanzi, ioli	980	835	12	217
4	40MnBc	850		ioli	500	Amanzi, ioli	980	785	10	207
5	45MnBc	840		ioli	500	Amanzi, ioli	1030	835	9	217
6	20Mn2bc'f	880		ioli	200	Amanzi, umoya	980	785	10	187
7	20CrdJ	880	800	Amanzi, ioli	200	Amanzi, umoya	835	540	10	179
7	20CrdJ	880	800	Amanzi, ioli	200	Amanzi, umoya	785	490	10	179
8	30Cr	860		ioli	500	Amanzi, ioli	885	685	11	187
9	35Kr	860		ioli	500	Amanzi, ioli	930	735	11	207
10	40Cr	850		ioli	520	Amanzi, ioli	980	785	9	207
11	45Cr	840		ioli	520	Amanzi, ioli	1030	835	9	217
12	50Cr	830		ioli	520	Amanzi, ioli	1080	930	9	229
13	38CrSi	900		ioli	600	Amanzi, ioli	980	835	12	255
14	20CrModJ	880		Amanzi, ioli	500	Amanzi, ioli	885	685	11	197
14	20CrModJ	880		Amanzi, ioli	500	Amanzi, ioli	845	635	12	197
15	35CrMo	850		ioli	550	Amanzi, ioli	980	835	12	229
16	42CrMo	850		ioli	560	Amanzi, ioli	1080	930	12	217
17	38CrMoAld	940		Amanzi, ioli	640	Amanzi, ioli	980	835	12	229
17	38CrMoAld	940		Amanzi, ioli	640	Amanzi, ioli	930	785	14	229
18	50CrVA	860		ioli	500	Amanzi, ioli	1 275	1 130	10	255
19	2OCrMn	850		ioli	200	Amanzi, umoya	930	735	10	187
20	20CrMnSif	880		ioli	480	Amanzi, ioli	785	635	12	207
21	3OCrMnSif	880		ioli	520	Amanzi, ioli	1080	885	8	229
21	3OCrMnSif	880		ioli	520	Amanzi, ioli	980	835	10	229
22	35CrMnSiA£	880		ioli	230	Amanzi, umoya	1 620		9	229
23	20CrMnTie-f	880	870	ioli	200	Amanzi, umoya	1080	835	10	217
24	30CrMnTie*f	880	850	ioli	200	Amanzi, umoya	1 470		9	229
25	12CrNi2	860	780	Amanzi, ioli	200	Amanzi, umoya	785	590	12	207
26	12CrNi3	860	780	ioli	200	Amanzi, umoya	930	685	11	217
27	12Cr2Ni4	860	780	ioli	200	Amanzi, umoya	1080	835	10	269
28	40CrNiMoA	850	—-	ioli	600	Amanzi, umoya	980	835	12	269
29	45CrNiMoVA	860	-	ioli	460	ioli	1 470	1 325	7	269
^{a. Ulungelelwaniso oluvumelekileyo uluhlu lobushushu bonyango oludweliswe kwitheyibhile: ukucima ± 15 ℃, ubushushu obuphantsi bobushushu ± 20 ℃, ubushushu obuphezulu bomhlaba obushushu buyi-50 ℃.}^{b. Kuvavanyo lwe-tensile, iisampulu ezinqamlezayo okanye ezinde zinokuthathwa. Kwimeko yokungavumelani, isampuli yelongitudinal isetyenziswa njengesiseko solamlo.}^{c. Insimbi ene-Boron inokuba yinto eqhelekileyo ngaphambi kokucima, kwaye ukushisa okuqhelekileyo akufanele kube phezulu kunokushisa kwayo.}^{d. Ukuhanjiswa ngokweseti yedatha echazwe ngumfaki-sicelo. Xa umceli engakhange achaze, ukuhanjiswa kungenziwa ngokuhambelana nayiphi na idatha.} ^{e. Ukucima kokuqala kwentsimbi ye-titanium kunye ne-Ming Meng kunokutshintshwa ngokuqhelekileyo.} ^{f. Ukucima i-Isothermal kwi-280 C ~320 C.} ^{g. Kuvavanyo lwe-tensile, ukuba i-Rel ayinakulinganiswa, i-Rp0.2 inokulinganiswa endaweni ye-Rel.}

Imfuneko yoVavanyo

Ukwenziwa kweekhemikhali:

Ukolula, Ubulukhuni, Umothuko, Umngqusho, Ukugoba, uvavanyo lwe-Ultrasonic, iEddy yangoku, ukubhaqwa, ukubhaqwa okuvuzayo, iGalvanized

Iinkcukacha zeMveliso

Bhala umyalezo wakho apha kwaye uwuthumele kuthi

ASTM A335 umgangatho ophezulu pre...

Inkcazo yeCasing an...

ASME SA-106/SA-106M-2015 Ca...

APISPEC5L-2012 Carbon Seaml...

Isishwankathelo sombhobho weBoiler

Ubonelelo ngeFactory China High lobushushu ingxubevange ingxubevange ithubhu ingenamthungo / umbhobho

Inkcazelo emfutshane:

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isishwankathelo

Isicelo

IBanga eliPhambili

ICandelo leMichiza

IPropati yoomatshini

Imfuneko yoVavanyo

Iinkcukacha zeMveliso

Imibhobho yoomatshini/yoMchiza kunye nezichumiso

GB/T 8162-2008

I-ASTM A519-2006

I-BS EN 10210-1-2006

I-ASTM A53/A53M-2012

GB 9948-2006

GB 6479-2013

GB/T 17396-2009

Ifowuni

Umnxeba

I-imeyile

I-imeyile

Whatsapp

Whatsapp

Wechat

Wechat

Phezulu