China Hot New Products Alloy Low Pressure Boiler Pipe - ASME SA-106/SA-106M-2015 Carbon steel pipe – Sanonpipe Manufacturer and Supplier

Hot New Products Alloy Low Pressure Boiler Pipe - ASME SA-106/SA-106M-2015 Carbon steel pipe – Sanonpipe

Short Description:

Product Detail

Product Tags

Feedback (2)

No matter new customer or outdated client, We believe in extensive phrase and trusted relationship for heat exchange tubes, Seamless Tube A333 T11, Steel Pipe Manufacturers Near Me, Welcome to visit our firm and factory. Be sure to come to feel free to get in touch with us in case you need any additional assistance.

Hot New Products Alloy Low Pressure Boiler Pipe - ASME SA-106/SA-106M-2015 Carbon steel pipe – Sanonpipe Detail:

Overview

Application

Seamless steel pipe for high temperature operation ASTM A106, suitable for high temperature

Main Grade

Grade of high-quality carbon structural steel: GR.A,GR.B,GR.C

Chemical Component

	Composition, ％
	Grade A	Grade B	Grade C
Carbon, max	0.25A	0.3B	0.35B
Manganese	0.27-0.93	0.29-1.06	0.29-1.06
Phosphorus, max	0.035	0.035	0.035
Sulfur, max	0.035	0.035	0.035
Silicon, min	0.10	0.10	0.10
Chrome, maxC	0.40	0.40	0.40
Copper, maxC	0.40	0.40	0.40
Molybdenum, maxC	0.15	0.15	0.15
Nickel, maxC	0.40	0.40	0.40
Vanadium, maxC	0.08	0.08	0.08
A For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted up to a maximum of 1.35%.
B Unless otherwise specified by the purchaser, for each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted up to a maximum of 1.65%.
C These five elements combined shall not exceed 1%.

Mechanical Property

	Grade A		Grade B		Grade C
Tensile strength, min, psi(MPa)	48 000(330)		60 000(415)		70 000(485)
Yield strength, min, psi(MPa)	30 000(205)		35 000(240)		40 000(275)
	Longitudinal	Transverse	Longitudinal	Transverse	Longitudinal	Transverse
Elongation in 2 in. (50 mm), min, % Basic minimum elongation transverse strip tests, and for all small sizes tested in full section	35	25	30	16.5	30	16.5
When standard round 2-in. (50-mm) gauge length test specimen is used	28	20	22	12	20	12
For longitudinal strip tests	A		A		A
For transverse strip tests, a deduction for each 1/32-in. (0.8-mm) decrease in wall thickness below 5/16 in. (7.9 mm) from the basic minimum elongation of the following percentage shall be made		1.25		1.00		1.00
A The minimum elongation in 2 in. (50 mm) shall be determined by the following equation:
e=625000A 0.2 / U 0.9
for inch-pound units, and
e=1940A 0.2 / U 0.9
for SI units,
where: e = minimum elongation in 2 in. (50 mm), %, rounded to the nearest 0.5%, A = cross-sectional area of the tension test specimen, in.2 (mm2), based upon specified outside diameter or nominal specified outside diameter or nominal specimen width and specified wall thickness, rounded to the nearest 0.01 in.2 (1 mm2). (If the area thus calculated is equal to or greater than 0.75 in.2 (500 mm2), then the value 0.75 in.2 (500 mm2) shall be used.), and U = specified tensile strength, psi (MPa).

Test Requirement

In addition to ensuring chemical composition and mechanical properties, hydrostatic tests are performed one by one, and flaring and flattening tests are performed. . In addition, there are certain requirements for the microstructure, grain size, and decarburization layer of the finished steel pipe.

Supply Ability

Supply Ability: 1000 Tons Per Month Per Grade of ASTM SA-106 Steel Pipe

Packaging

In Bundles And In Strong Wooden Box

Delivery

7-14 days if in stock, 30-45 days to produce

Payment

30% depsoit, 70% L/C or B/L copy or 100% L/C at sight

Product Detail

Boiler Tube

GB/T5310-2017

ASME SA-106/SA-106M-2015

ASTMA210(A210M)-2012

eamless steel tubes for normal structure

ASME SA-213/SA-213M

ASTM A335/A335M-2018

Product detail pictures:

Related Product Guide:

Our pursuit and corporation aim should be to "Always satisfy our consumer requirements". We carry on to build and style and design remarkable quality items for both our outdated and new clients and reach a win-win prospect for our clients at the same time as us for Hot New Products Alloy Low Pressure Boiler Pipe - ASME SA-106/SA-106M-2015 Carbon steel pipe – Sanonpipe , The product will supply to all over the world, such as: Costa Rica, Barbados, Florida, With good quality, reasonable price and sincere service, we enjoy a good reputation. Products are exported to South America, Australia, Southeast Asia and so on. Warmly welcome customers at home and abroad to cooperate with us for the brilliant future.

12crlmov Alloy Steel Pipe