Sashen murabba'i mai rami

Takaitaccen Bayani:

Karfe da aka saba amfani da shi: S275, S355, S460-JRH, JOH, J2H, K2H, NH.

Aikace-aikace: Gina tsarin ƙarfe mai girma, gina jiragen ruwa, masana'antu na injiniya, cranes na hasumiya, da sauransu.

Aika mana imel Sauke shi azaman PDF

Cikakken Bayani game da Samfurin

Alamun Samfura

Bayani

Daidaitacce: BSEN10219-1-2006	Alloy Ko A'a: A'a
Rukunin Aji: S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H	Aikace-aikace: Tsarin
Kauri: 1 - 100 mm	Maganin Surface: Kamar yadda abokin ciniki ke buƙata
Diamita na Waje (Zagaye): 10 - 1000 mm	Dabara: An yi birgima da zafi ko kuma an yi birgima da sanyi
Tsawon Lokaci: Tsawon Lokaci ko Tsawon Lokaci	Maganin zafi: Saukewa/Daidaita/Rage Damuwa
Siffar Sashe: Murabba'i	Bututu Na Musamman: Bututun Bango Mai Kauri
Wurin Asali: China	Amfani: Tsarin injiniya, tsarin gabaɗaya
Takardar Shaida: ISO9001:2008	Gwaji: ECT/UT

Aikace-aikace

Ana amfani da shi musamman don tsarin injiniya, tsarin gabaɗaya.

Babban aji

S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H

Sinadaran Sinadarai

Matsayin Stell		Nau'in cire iskar shaka^a	% ta taro, matsakaicin
Sunan ƙarfe	Lambar ƙarfe	Nau'in cire iskar shaka^a	C	Si	Mn	P	S	N^b
S235JRH	1.0039	FF	0.17	—	1.4	0.04	0.04	0.009
S275J0H	1.0149	FF	0.2	—	1.5	0.035	0.035	0.009
S275J2H	1.0138	FF	0.2	—	1.5	0.03	0.03	—
S355J0H	1.0547	FF	0.22	0.55	1.6	0.035	0.035	0.009
S355J2H	1.0576	FF	0.22	0.55	1.6	0.03	0.03	—
S355K2H	1.0512	FF	0.22	0.55	1.6	0.03	0.03	—
a An tsara hanyar deoxidation kamar haka: FF: Karfe mai cikakken ƙarfi wanda ke ɗauke da abubuwan ɗaure nitrogen a adadin da ya isa ya ɗaure nitrogen da ake da shi (misali, ƙaramin 0,020% jimillar Al ko 0,015% na Al mai narkewa). b Matsakaicin ƙimar nitrogen ba zai yi aiki ba idan sinadarin sinadarai ya nuna mafi ƙarancin jimlar abun ciki na Al na 0.020% tare da mafi ƙarancin rabon AlN na 2:1, ko kuma idan akwai isasshen sauran abubuwan da ke ɗaure N. Za a rubuta abubuwan da ke ɗaure N a cikin Takardar Dubawa.

Kadarar Inji

Karfe Grade		Mafi ƙarancin ƙarfin amfanin ƙasa R_eH MPa		Ƙarfin tensile R_m MPa		Mafi ƙarancin tsawo A^d %	Mafi ƙarancin kuzarin tasiri KV^e J
Sunan ƙarfe	Lambar ƙarfe	Kauri da aka ƙayyade mm		Kauri da aka ƙayyade mm		Kauri da aka ƙayyade mm	a zafin gwaji na
		≤16	＞ 16≤ 40	﹤3	≥3≤ 40	≤ 40	-20℃	0℃	20℃
S235JRH^a	1.0039	235	225	360-510	360-510	24^b	-	-	27
S275J0Hc^a	1.0149	275	265	430-580	410-560	20^c	-	27	-
S275J2H	1.0138						27	-	-
S355J0H^a	1.0547	355	345	510-680	470-630	20^c	-	27	-
S355J2H	1.0576						27	-	-
S355K2H	1.0512						40^f	-	-
a Ana tabbatar da kaddarorin tasirin ne kawai lokacin da aka ƙayyade Zaɓin 1.3. b Ga kauri >3 mm da girman sashe D/T < 15 (zagaye) da (B+Hy2T < 12,5 (murabba'i da murabba'i mai kusurwa huɗu), mafi ƙarancin tsawo zai ragu da 2. Ga kauri ≤ 3 mm, mafi ƙarancin ƙimar tsawo shine 17%. c Ga girman sassan DIT < 15 (da'ira) da (B+Hy2T < 12,5 (murabba'i da murabba'i mai kusurwa huɗu), an rage mafi ƙarancin tsayi da 2. d Don kauri < 3 mm duba 9.2.2. e Don halayen tasirin ga sassan gwajin da aka rage duba 6.7.2. f Wannan ƙimar ta yi daidai da 27J a -30 °C (duba EN 1993-1-1).

Bukatar Gwaji

Tsawo, Ƙarfin Tayi da Ƙarfin Yawa; Gwajin Tayi daidai da EN 10002-1; Ƙarfin Tayi; Gwajin Tayi daidai da EN 10045-1; Walda; Nazarin Sinadarai daidai da hanyoyin da aka jera a cikin CR 10261.