BS EN 10219-1: Nā ʻāpana hakahaka i hoʻopaʻa ʻia i hoʻokumu anu ʻia o nā kila ʻaʻole-alloy a me nā kila palaoa maikaʻi

Wehewehe Pōkole:

Nā ʻāpana hakahaka i hoʻopaʻa ʻia i ke anu o nā kila ʻaʻole-alloy a me nā kila palaoa maikaʻi

Uku:30% waiho, 70% L/C a i ʻole B/L kope a i ʻole 100% L/C i ka ʻike ʻana

Ka nui o ke kauoha liʻiliʻi loa:Hoʻokahi pahu a i ʻole 25 tone

Ka hiki ke hoʻolako:Ka Papa Hana Makahiki 20000 Tons o ka Paipu Kila

Ka manawa o waena o ka hoʻomaka a i ka wā pau:7-14 mau lā inā ma ka waihona, 30-45 mau lā e hana ai

Hoʻopili ʻana:ʻEleʻele Nalowale, bevel a me ka pāpale no kēlā me kēia paipu; Pono e hoʻopaʻa ʻia ka OD ma lalo o 219mm i loko o ka pūʻolo, a ʻaʻole ʻoi aku ka nui o kēlā me kēia pūʻolo ma mua o 2 tons.

E leka uila mai iā mākou Hoʻoiho ma ke ʻano he PDF

Nā kikoʻī huahana

Nā Lepili Huahana

ʻIke laulā

Kūlana: BSEN10219-1-2006	Alloy a i ʻole ʻaʻole: ʻAʻole
Pūʻulu Papa: S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H	Noi: ʻAno
Mānoanoa: 1 - 100 mm	Ka Lapaʻau ʻIli: E like me ke koi a ka mea kūʻai aku
Anawaena Waho (Poepoe): 10 - 1000 mm	ʻAno hana: Wela ʻōwili a anu ʻōwili paha
Lōʻihi: Loa paʻa a lōʻihi paha	Ka mālama wela: Hoʻoheheʻe/Hoʻomaʻamaʻa/Hoʻomaha i ke kaumaha
ʻĀpana ʻAno: Poepoe	Paipu Kūikawā: Paipu Paia Mānoanoa
Kahi i hoʻomaka ai: Kina	Hoʻohana: ʻAno hana mechanical, ʻano hana maʻamau
Palapala hōʻoia: ISO9001:2008	Hoʻāʻo: ECT/UT

Noi

Ua hoʻohana nui ʻia no ka ʻano hana Mechanical, ʻano hana maʻamau.

Papa Nui

S235JRH, S275JOH, S275J2H, S355JOH, S355J2H,S355K2H

ʻĀpana Kemika

Papa kila		ʻAno o ka deoxidation^a	% ma ke kaumaha, ka nui loa
Inoa kila	Helu kila	ʻAno o ka deoxidation^a	C	Si	Mn	P	S	N^b
S235JRH	1.0039	FF	0.17	—	1.4	0.04	0.04	0.009
S275J0H	1.0149	FF	0.2	—	1.5	0.035	0.035	0.009
S275J2H	1.0138	FF	0.2	—	1.5	0.03	0.03	—
S355J0H	1.0547	FF	0.22	0.55	1.6	0.035	0.035	0.009
S355J2H	1.0576	FF	0.22	0.55	1.6	0.03	0.03	—
S355K2H	1.0512	FF	0.22	0.55	1.6	0.03	0.03	—
Ua kapa ʻia ke ʻano deoxidation penei: FF: Ke kila i pepehi piha ʻia me nā mea hoʻopaʻa naikokene i nā nui e lawa ai e hoʻopaʻa i ka naikokene i loaʻa (e laʻa, ka liʻiliʻi loa he 0,020% Al āpau a i ʻole 0,015% Al hiki ke hoʻoheheʻe ʻia). ʻAʻole pili ka waiwai kiʻekiʻe loa no ka naikokene inā hōʻike ka hoʻohui kemika i ka liʻiliʻi loa o ka nui o Al o 0.020% me ka liʻiliʻi loa o ka lakio AlN o 2:1, a i ʻole inā lawa nā mea hoʻopaʻa N ʻē aʻe. Pono e hoʻopaʻa ʻia nā mea hoʻopaʻa N ma ka Palapala Nānā.

Waiwai Mīkini

Papa kila		Ka ikaika hua haʻahaʻa loa R_eH MPa		ikaika tensile R_m MPa		Ka hoʻolōʻihi iki ʻana A^d %	Ka ikehu hopena haʻahaʻa loa KV^e J
Inoa kila	Helu kila	Mānoanoa i kuhikuhi ʻia mm		Mānoanoa i kuhikuhi ʻia mm		Mānoanoa i kuhikuhi ʻia mm	ma ka mahana hoʻāʻo o
		≤16	＞ 16≤ 40	3	≥3≤ 40	≤ 40	-20℃	0℃	20℃
S235JRH^a	1.0039	235	225	360-510	360-510	24^b	-	-	27
S275J0Hc^a	1.0149	275	265	430-580	410-560	20^c	-	27	-
S275J2H	1.0138						27	-	-
S355J0H^a	1.0547	355	345	510-680	470-630	20^c	-	27	-
S355J2H	1.0576						27	-	-
S355K2H	1.0512						40^f	-	-
ʻE hōʻoia ʻia nā waiwai hopena ke kuhikuhi ʻia ke Koho 1.3. b No nā mānoanoa >3 mm a me nā nui ʻāpana D/T < 15 (pōʻai) a me (B+Hy2T < 12,5 (huinahā a me ka huinahā) ua hoʻemi ʻia ka elongation liʻiliʻi loa e 2. No nā mānoanoa ≤ 3 mm ʻo ka waiwai liʻiliʻi loa no ka elongation he 17%. c No nā nui ʻāpana DIT < 15 (pōʻai) a me (B+Hy2T < 12,5 (huinahā a me ka huinahā) ua hoʻemi ʻia ka elongation liʻiliʻi loa e 2. d No nā mānoanoa < 3 mm e ʻike i ka 9.2.2. No nā waiwai hopena no nā ʻāpana hoʻāʻo ʻāpana i hoʻemi ʻia, e ʻike i ka 6.7.2. f Pili kēia waiwai i 27J ma-30 °C (e nānā iā EN 1993-1-1).

Koi Hoʻāʻo

Elongation, Ikaika tensile a me ka ikaika hua; Hoʻāʻo tensile e like me EN 10002-1; Ikaika hopena; Hoʻāʻo hopena e like me EN 10045-1; Weldability; Ka nānā ʻana i nā kemika e like me nā ʻano hana i helu ʻia ma CR 10261.