China Manufactur standard Steel Pipe Nominal Sizes - Seamless, welded and hot-dip galvanized pipe – Sanonpipe Manufacturer and Supplier

Manufactur standard Steel Pipe Nominal Sizes - Seamless, welded and hot-dip galvanized pipe – Sanonpipe

Short Description:

Product Detail

Product Tags

Feedback (2)

We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first", and will sincerely create and share success with all clients for Low Temperature Steel Pipe A333 Gr6, seamless carbon steel boiler tubes, Asme Sa210, We are looking forward to establishing long-term business relationships with you. Your comments and suggestions are highly appreciated.

Manufactur standard Steel Pipe Nominal Sizes - Seamless, welded and hot-dip galvanized pipe – Sanonpipe Detail:

Overview

Application

It Is Mainly Used for force and pressure parts, and for general purpose steam, water, gas and air pipes.

Main Grade

GR.A, GR.B

Chemical Component

Grade	Component %，≤
Grade	C	Mn	P	S	Cu^A	Ni^A	Cr^A	Mo^A	V^A
S type（seamless pipe）
GR.A	0.25^B	0.95	0.05	0.045	0.40	0.40	0.40	0.15	0.08
GR.B	0.30^C	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08
E type（Resistance welded pipe）
GR.A	0.25^B	0.95	0.05	0.045	0.40	0.40	0.40	0.15	0.08
GR.B	0.30^C	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08
F type（Furnace Welded Pipe）
A	0.30^B	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08

A The sum of these five elements must not be greater than 1.00%。

B For every 0.01% decrease in the maximum carbon content, the maximum manganese content is allowed to increase by 0.06%, but the maximum cannot exceed 1.35%.

C Each 0.01% decrease in the maximum carbon content will allow the maximum manganese content to increase by 0.06%, but the maximum must not exceed 1.65%.

Mechanical Property

item

GR.A

GR.B

tensile strength, ≥, psi [MPa]

Yield Strength, ≥, psi [MPa]

Gauge 2in.or 50mm elongation

48 000 [330]30 000 [205]A,B

60 000 [415]35 000 [240]A,B

A The minimum elongation of gauge length 2in. (50mm) shall be determined by the following formula：

e=625000(1940)A^0.2/U^0.9

e = the minimum elongation of the gauge 2in. (50mm), the percentage rounded to the nearest 0.5%;

A = Calculated according to the specified outer diameter of the nominal tube or the nominal width of the tensile sample and its specified wall thickness, and rounded to the nearest cross-sectional area of the tensile sample of 0.01 in.2 (1 mm2), and It is compared with 0.75in.2 (500mm2), whichever is smaller.

U = specified minimum tensile strength, psi (MPa).

B For various combinations of different sizes of tensile test specimens and prescribed minimum tensile strength, the required minimum elongation is shown in Table X4.1 or Table X4.2, according to its applicability.

Test Requirement

Tensile test, bending test, hydrostatic test, nondestructive electrical test of welds.

Supply Ability

Supply Ability: 2000 Tons Per Month Per Grade Of ASTM A53/A53M-2012 Steel Pipe

Packaging

In Bundles And In Strong Wooden Box

Delivery

7-14 days if in stock, 30-45 days to produce

Payment

30% depsoit, 70% L/C or B/L copy or 100% L/C at sight

Product Detail

Boiler Tube

GB/T 8162-2008

ASTM A519-2006

BS EN10210-1-2006

ASTM A53/A53M-2012

GB9948-2006

GB6479-2013

GB/T 17396-2009

Product detail pictures:

Related Product Guide:

We enjoy an extremely good status among our prospects for our great merchandise top quality, competitive price and the ideal service for Manufactur standard Steel Pipe Nominal Sizes - Seamless, welded and hot-dip galvanized pipe – Sanonpipe , The product will supply to all over the world, such as: Qatar, Melbourne, Germany, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.

A335p11 Alloy Pipe