China PriceList for 12crlmov Alloy Steel Pipe - Seamless, welded and hot-dip galvanized pipe – Sanonpipe Manufacturer and Supplier

PriceList for 12crlmov Alloy Steel Pipe - Seamless, welded and hot-dip galvanized pipe – Sanonpipe

Short Description:

Product Detail

Product Tags

Feedback (2)

Our items are commonly identified and trusted by customers and may fulfill continuously switching economic and social wants of Steel Pipe P9, Alloy Steel Pipe Factory, Alloy Pipe Tee, Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products!

PriceList for 12crlmov Alloy Steel Pipe - Seamless, welded and hot-dip galvanized pipe – Sanonpipe Detail:

Overview

Application

It Is Mainly Used for force and pressure parts, and for general purpose steam, water, gas and air pipes.

Main Grade

GR.A, GR.B

Chemical Component

Grade	Component %，≤
Grade	C	Mn	P	S	Cu^A	Ni^A	Cr^A	Mo^A	V^A
S type（seamless pipe）
GR.A	0.25^B	0.95	0.05	0.045	0.40	0.40	0.40	0.15	0.08
GR.B	0.30^C	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08
E type（Resistance welded pipe）
GR.A	0.25^B	0.95	0.05	0.045	0.40	0.40	0.40	0.15	0.08
GR.B	0.30^C	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08
F type（Furnace Welded Pipe）
A	0.30^B	1.20	0.05	0.045	0.40	0.40	0.40	0.15	0.08

A The sum of these five elements must not be greater than 1.00%。

B For every 0.01% decrease in the maximum carbon content, the maximum manganese content is allowed to increase by 0.06%, but the maximum cannot exceed 1.35%.

C Each 0.01% decrease in the maximum carbon content will allow the maximum manganese content to increase by 0.06%, but the maximum must not exceed 1.65%.

Mechanical Property

item

GR.A

GR.B

tensile strength, ≥, psi [MPa]

Yield Strength, ≥, psi [MPa]

Gauge 2in.or 50mm elongation

48 000 [330]30 000 [205]A,B

60 000 [415]35 000 [240]A,B

A The minimum elongation of gauge length 2in. (50mm) shall be determined by the following formula：

e=625000(1940)A^0.2/U^0.9

e = the minimum elongation of the gauge 2in. (50mm), the percentage rounded to the nearest 0.5%;

A = Calculated according to the specified outer diameter of the nominal tube or the nominal width of the tensile sample and its specified wall thickness, and rounded to the nearest cross-sectional area of the tensile sample of 0.01 in.2 (1 mm2), and It is compared with 0.75in.2 (500mm2), whichever is smaller.

U = specified minimum tensile strength, psi (MPa).

B For various combinations of different sizes of tensile test specimens and prescribed minimum tensile strength, the required minimum elongation is shown in Table X4.1 or Table X4.2, according to its applicability.

Test Requirement

Tensile test, bending test, hydrostatic test, nondestructive electrical test of welds.

Supply Ability

Supply Ability: 2000 Tons Per Month Per Grade Of ASTM A53/A53M-2012 Steel Pipe

Packaging

In Bundles And In Strong Wooden Box

Delivery

7-14 days if in stock, 30-45 days to produce

Payment

30% depsoit, 70% L/C or B/L copy or 100% L/C at sight

Product Detail

Boiler Tube

GB/T 8162-2008

ASTM A519-2006

BS EN10210-1-2006

ASTM A53/A53M-2012

GB9948-2006

GB6479-2013

GB/T 17396-2009

Product detail pictures:

Related Product Guide:

With our rich working experience and thoughtful companies, we have now been recognized as being a trustworthy supplier for a lot of global potential buyers for PriceList for 12crlmov Alloy Steel Pipe - Seamless, welded and hot-dip galvanized pipe – Sanonpipe , The product will supply to all over the world, such as: Haiti, Malaysia, Kuwait, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.

Alloy Chemical Pipe