China Quality Inspection for Oil Steel Pipe - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe Manufacturer and Supplier

Quality Inspection for Oil Steel Pipe - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe

Short Description:

Product Detail

Product Tags

Feedback (2)

We'll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of intercontinental top-grade and high-tech enterprises for Alloy Steel Pipe Russia, 27simn Steel Pipe, Alloy Steel Pipe Factory, Our merchandise are new and previous prospects consistent recognition and trust. We welcome new and outdated shoppers to contact us for long term small business relations, common advancement. Let's speeding within the dark!

Quality Inspection for Oil Steel Pipe - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe Detail:

Overview

Application

Seamless steel pipe for high pressure fertilizer equipment is a high quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipeline.

Main Grade

Grade of high-quality carbon structural steel: 10#、20#

Chemical Component

Chemical Component/%
NO	C	Si	Mn	Cr	Mo	V	W	Nb	Ni	P S
										no more than
10	0. 07-0. 13	0. 17 -0. 37	0.35 -0. 65	-	-	-	-	-	-	0.025	0.015

20	0. 17 -0. 23	0.17 -0. 37	0. 35-0.65	-	-	-	-	-	-	0.025	0.015

Q345Ba	0. 12 -0. 20	0.20-0. 50	1.20-1.70	<0. 30	<0. 10	mis	-	<0.07	W0. 50	0.025	0.015

Q345C”	0. 12 -0. 20	0.20 -0. 50	1.20 -1. 70	W0. 30	<0. 10	<0. 15	-	W0.07	<0. 50	0.025	0.015

Q345D”	0. 12 -0. 18	0.20 -0. 50	1. 20~1.70	W0. 30	<0. 10	<0. 15	-	W0.07	<0. 50	0. 025	0.015

Q345Ea*b	0. 12 -0. 18	0. 20-0. 50	1. 20 -1.70	W0. 30	<0. 10	<0. 15	-	<0.07	<0. 50	0. 025	0.01

12CrMo	0. 08-0. 15	0.17 -0. 37	0. 40-0. 70	0. 40-0. 70	0. 40-0. 55	-	-	-	-	0. 025	0.015

15CrMo	0. 12 -0. 18	0. 17 -0. 37	0. 40-0. 70	0. 80-1. 10	0. 40-0.55	-	-	-	-	0. 025	0. 015

12Cr2Mo	0. 08-0. 15	<0. 50	0. 40-0.6	2.00-2. 50	0. 90-1. 13	-	-	-	-	0.025	0. 015

12Cr5Mo	<0. 15	<0.50	<0. 60	4. 00-6.00	0. 40-0. 60	-	-	-	<0. 60	0. 025	0. 015

lOMoWVNb	0. 07-0. 13	0. 50-0.8	0. 50-0.8	-	0. 60-0. 90	0. 30-0. 50	0. 50-0. 90	0. 06-0. 12	-	0.025	0.015

12SiMoVNb	0.08 -0. 14	0.50 -0.8	0. 60-0. 90	-	0. 90-1. 10	0. 30-0. 50	-	0. 04-0.08	-	0.025	0.015

awhen it is necessary to add fine grain elements, the steel shall contain at least one of Al, Nb, V and Ti. The added fine grain elements shall be indicated in the quality certificate. Ti content shall not be more than 0.20%
bAl content in steel shall not be less than 0.020%, or ala content in steel shall not be less than 0.015%

Mechanical Property

Grade	Mechanical Property
	Tensile MPa	Yield MPa			Elong after fracture A/%		Reduction of area Z/%	Shork absorption energy （KV2）/J
		Yield MPa						Shork absorption energy （KV2）/J
		Steel tube wall thickness/mm						Test temperature/℃	portrait	transver
		W16	>16 — 40	>40	portrait	transver			portrait	transver
		not less than							not less than
10	335〜490	205	195	185	24	22	一	一	—	一
20	410〜550	245	235	225	24	22	一	0	40	27
Q345B	490〜670	345	335	325	21	19	一	20	40	27
Q345C	490〜670	345	335	325	21	19	一	0	40	27
Q345D	490〜670	345	335	325	21	19	一	-20	40	27
Q345E	490〜670	345	335	325	21	19	—	-40	40	27
12CrMo	410~560	205	195	185	21	19	—	20	40	27
15CrMo	440〜640	295	285	275	21	19	一	20	40	27
12Cr2Moa	450〜60。	280			20	18	一	20	40	27
12Cr5Mo	390〜590	195	185	175	22	20	一	20	40	27
lOMoWVNb	470〜670	295	285	275	19	17	一	20	40	27
12SiMoVNb	2470	315	305	295	19	17	50	20	40	27
a 12Cr2Mo pipe，When D<30 mm and SW3 mm，the lower yield strength or specified plastic extension strength can be reduced by 10 MPa.

Test Requirement

In addition to ensuring the chemical composition and mechanical properties, the steel pipe directly rolled by ingot shall be subject to low power inspection, and eddy current inspection or magnetic flux leakage inspection can be used instead of hydraulic test.

Supply Ability

2000 Tons Per Month Per Grade of Seamless steel tubes for high-pressure

chemical fertilizer processing equipments.

Packaging

In Bundles And In Strong Wooden Box

Delivery

7-14 days if in stock, 30-45 days to produce

Payment

30% depsoit, 70% L/C or B/L copy or 100% L/C at sight

Product Detail

mechanical/Chemical&Fertilizer Pipes

GB/T8162-2008

ASTM_A519-2006

BS EN 10210-1-2006

ASTM A53A53M-2012

GB9948-2006

GB6479-2013

GB/T 17396-2009

Product detail pictures:

Related Product Guide:

Our mission will be to grow to be an innovative supplier of high-tech digital and communication devices by giving worth added design and style, world-class production, and service capabilities for Quality Inspection for Oil Steel Pipe - Seamlless steel tubes for high-pressure chemical fertilizer processing equipments-GB6479-2013 – Sanonpipe , The product will supply to all over the world, such as: Jamaica, Roman, Vietnam, All the employees in factory, store, and office are struggling for one common goal to provide better quality and service. Real business is to get win-win situation. We would like to provide more support for customers. Welcome all nice buyers to communicate details of our products with us!

16mn Grade Alloy Steel Seamless