Umenzi kunye noMboneleli wecandelo elingenanto eliseTshayina

Icandelo elingenanto elisikwere

Icandelo elisikwere elingenanto Umfanekiso obonisiweyo

Inkcazo emfutshane:

Iindidi zentsimbi eziqhelekileyo ze: S275, S355, S460-JRH, JOH, J2H, K2H, NH.

Izicelo: Ukwakhiwa kwesakhiwo sentsimbi esikhulu, ukwakhiwa kweenqanawa, ukwenziwa koomatshini, iikhreyini zeenqaba, njl.

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isishwankathelo

Umgangatho: BSEN10219-1-2006	I-alloy okanye Hayi: Hayi
Iqela leBanga: S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H	Isicelo: Ulwakhiwo
Ubukhulu: 1 - 100 mm	Unyango Lomphezulu: Njengoko kufuneka kumthengi
Ububanzi obungaphandle (Isangqa): 10 - 1000 mm	Indlela yokusebenza: I-Hot Rolled okanye i-Cold Rolled
Ubude: Ubude obuzinzileyo okanye ubude obungacwangciswanga	Unyango lobushushu: Ukunciphisa uxinzelelo/ukunciphisa uxinzelelo
Imilo yeCandelo: Isikwere	Umbhobho oKhethekileyo: Umbhobho wodonga oThixekileyo
Indawo Yokuqala: eTshayina	Ukusetyenziswa: Ulwakhiwo lweMishini, ulwakhiwo ngokubanzi
Isiqinisekiso: ISO9001:2008	Uvavanyo: ECT/UT

Isicelo

Isetyenziswa kakhulu kwisakhiwo seMishini, isakhiwo ngokubanzi.

Ibanga eliPhambili

S235JRH, S275JOH, S275J2H, S355JOH, S355J2H,S355K2H

Icandelo leKhemikhali

Ibanga leStell		Uhlobo lokususa ioksijini^a	% ngobunzima, ubuninzi
Igama lentsimbi	Inombolo yentsimbi	Uhlobo lokususa ioksijini^a	C	Si	Mn	P	S	N^b
S235JRH	1.0039	FF	0.17	—	1.4	0.04	0.04	0.009
S275J0H	1.0149	FF	0.2	—	1.5	0.035	0.035	0.009
S275J2H	1.0138	FF	0.2	—	1.5	0.03	0.03	—
S355J0H	1.0547	FF	0.22	0.55	1.6	0.035	0.035	0.009
S355J2H	1.0576	FF	0.22	0.55	1.6	0.03	0.03	—
S355K2H	1.0512	FF	0.22	0.55	1.6	0.03	0.03	—
Indlela yokususa i-oxidation ichazwe ngolu hlobo lulandelayo: FF: Intsimbi ebulewe ngokupheleleyo equlethe izinto zokubopha initrogen ngobuninzi obaneleyo ukubopha initrogen ekhoyo (umz., ubuncinci be-0,020% iyonke ye-Al okanye i-0,015% ye-Al enyibilikayo). b Ixabiso eliphezulu le-nitrogen alisebenzi ukuba ukwakheka kweekhemikhali kubonisa umxholo opheleleyo we-Al oyi-0.020% kunye nomlinganiselo ophantsi we-AlN oyi-2:1, okanye ukuba kukho ezinye izinto ezaneleyo zokubopha i-N. Izinto zokubopha i-N mazirekhodwe kuXwebhu loHlolo.

Ipropati yoomatshini

Ibanga lentsimbi		Amandla amancinci okuvelisa isivuno R_eH I-MPa		amandla okutyhafa R_m I-MPa		Ubuncinane bobude A^d %	Amandla aphantsi empembelelo KV^e J
Igama lentsimbi	Inombolo yentsimbi	Ubukhulu obuchaziweyo mm		Ubukhulu obuchaziweyo mm		Ubukhulu obuchaziweyo mm	kubushushu bovavanyo lwe
		≤16	＞ 16≤ 40	﹤3	≥3≤ 40	≤ 40	-20℃	0℃	20℃
S235JRH^a	1.0039	235	225	360-510	360-510	24^b	-	-	27
S275J0Hc^a	1.0149	275	265	430-580	410-560	20^c	-	27	-
S275J2H	1.0138						27	-	-
S355J0H^a	1.0547	355	345	510-680	470-630	20^c	-	27	-
S355J2H	1.0576						27	-	-
S355K2H	1.0512						40^f	-	-
Iimpawu zempembelelo ziqinisekiswa kuphela xa uKhetho 1.3 luchaziwe. b Kwimilinganiselo yobukhulu >3 mm kunye nobukhulu becandelo D/T < 15 (ijikelezi) kunye (B+Hy2T < 12,5 (isikwere kunye noxande) ubuncinci bobude buncitshiswa ngo-2. Kwimilinganiselo yobukhulu ≤ 3 mm ixabiso elincinci lobude yi-17%. c Kwiisayizi zecandelo i-DIT < 15 (esetyhula) kunye ne-(B+Hy2T < 12,5 (isikwere kunye noxande) ubuncinci bobude buncitshiswa nge-2. d Ubukhulu < 3 mm jonga ku-9.2.2. e Ukuze ufumane iipropati zempembelelo zeziqwenga zovavanyo zecandelo elincitshisiweyo jonga ku-6.7.2. Eli xabiso lihambelana ne-27J kwi-30 °C (jonga i-EN 1993-1-1).

Imfuneko yoVavanyo

Ukwandiswa, Amandla okutsalwa kunye namandla okukhupha; Uvavanyo lokutsalwa ngokuhambelana ne-EN 10002-1; Amandla okutsalwa; Uvavanyo lokutsalwa ngokuhambelana ne-EN 10045-1; Ukuwelda; Uhlalutyo lweekhemikhali ngokuhambelana neendlela ezidweliswe kwi-CR 10261.