English
中中

Tubi mechanici sine suturis chalybis carbonis et mixturarum metallorum

Tubi mechanici sine suturis chalybis carbonis et mixturae metallorum. Imago Praecipua.
  • Tubi mechanici sine suturis chalybis carbonis et mixturarum metallorum
  • Tubi mechanici sine suturis chalybis carbonis et mixturarum metallorum
  • Tubi mechanici sine suturis chalybis carbonis et mixturarum metallorum

Descriptio Brevis:

Tubi ferrei sine suturis, tubi ferrei carbonis et tubi mechanici mixturae, praesertim ad usum mechanicum.ASTM A519-2006Tubi mechanici mixturae metallorum normae imprimis includunt

1018, 1026, 8620, 4130, 4140 cetera.


  • Solutio:Depositum 30%, 70% L/C vel exemplar B/L vel 100% L/C ad conspectum
  • Quantitas Ordinis Minima:1 PC
  • Facultatem Suppletoriam:Inventarium annuum 20000 tonnarum tuborum ferreorum
  • Tempus Ducendi:Si in promptu est, dies VII-XIV, ad producendum dies XXX-XLV.
  • Sarcina:Nigra evanescens, lima et operculum pro singulis tubis; diametro externo infra 219mm in fasciculo convasari debent, et quisque fasciculus duas tonnas non excedat.
    • Deprime ut PDF

    Detalia Producti

    Etiquettae Productarum

    Conspectus

    Norma:ASTM A519-2006 Mixtura An Non: Mixtura An Carbonium
    Classis Coetus: 1018, 1026, 8620, 4130, 4140 Applicatio: Tubus mechanicus
    Crassitudo: 1 - 100 mm Curatio Superficiei: Ut postulatio emptoris
    Diameter Externus (Rotundus): 10 - 1000 mm Ars: Calida Laminata vel Frigida Laminata
    Longitudo: Longitudo fixa vel longitudo fortuita Curatio caloris: Recoctio/Normalisatio/Levatio tensionis
    Forma Sectionis: Rotunda Tubus Specialis: Tubus Parietes Crassi
    Locus Originis: Sina Usus: mechanicus
    Certificatio: ISO9001:2008 Examen: ECT/UT

    Applicatio

    Praecipue ad mechanicas adhibetur et ad cylindros gasi fabricandos. Tubos mechanicos sine suturis ex carbone et chalybe mixto comprehendit, et tam tubos mechanicos calido perfectos quam tubos mechanicos frigido perfectos amplectitur, magnitudinibus usque ad diametrum exteriorem 12 3⁄4 in. (323.8 mm) pro tubis rotundis cum crassitudinibus parietum prout requiritur.

    Gradus Praecipuus

    1018, 1026, 8620, 4130, 4140

    Pars Chemica

    TABULA 1 Requisita Chemica Chalybum Carbonis Humilis

    Gradus Limites Compositionis Chemicae, %
    Designatio CarbonA Manganum B Phosphorus,B Sulphur,B
          maximum maximum
    MT X 1015 0.10–0.20 0.60–0.90 0.04 0.05
    MT 1010 0.05–0.15 0.30–0.60 0.04 0.05
    MT 1015 0.10–0.20 0.30–0.60 0.04 0.05
    MT 1020 0.15–0.25 0.30–0.60 0.04 0.05
    MT X 1020 0.15–0.25 0.70–1.00 0.04 0.05


    TABULA II Requisita Chemica Aliorum Chalybum Carbonis    BLimites ad analysin caloris pertinent; nisi requisitum a 6.1, analyses productorum tolerantiis additis in Tabula 5 datis obnoxiae sunt.

    Gradus   Limites Compositionis Chemicae, %A  
    Designatio        
    Carbonium Manganum Phosphorus Sulphur
          maximum maximum
    1008 0.10 maximum 0.30–0.50 0.04 0.05
    1010 0.08–0.13 0.30–0.60 0.04 0.05
    1012 0.10–0.15 0.30–0.60 0.04 0.05
    1015 0.13–0.18 0.30–0.60 0.04 0.05
    1016 0.13–0.18 0.60–0.90 0.04 0.05
    1017 0.15–0.20 0.30–0.60 0.04 0.05
    1018 0.15–0.20 0.60–0.90 0.04 0.05
    1019 0.15–0.20 0.70–1.00 0.04 0.05
    1020 0.18–0.23 0.30–0.60 0.04 0.05
    1021 0.18–0.23 0.60–0.90 0.04 0.05
    1022 0.18–0.23 0.70–1.00 0.04 0.05
    1025 0.22–0.28 0.30–0.60 0.04 0.05
    1026 0.22–0.28 0.60–0.90 0.04 0.05
    1030 0.28–0.34 0.60–0.90 0.04 0.05
    1035 0.32–0.38 0.60–0.90 0.04 0.05
    1040 0.37–0.44 0.60–0.90 0.04 0.05
    1045 0.43–0.50 0.60–0.90 0.04 0.05
    1050 0.48–0.55 0.60–0.90 0.04 0.05
    MDXVIII 0.15–0.21 1.10–1.40 0.04 0.05
    MDXXIV 0.19–0.25 1.35–1.65 0.04 0.05
    MDXLI 0.36–0.44 1.35–1.65 0.04 0.05

    A Limites et intervalla in hac tabula data ad analysin caloris pertinent; nisi requiritur a6.1, analyses productorum tolerantiis additis applicabilibus in Tabella Numero 5 datis obnoxiae sunt.

    TABULA III Requisita Chemica pro Chalybibus Compositis
    NOTA 1—Intervalla et limites in hac tabula ad chalybem pertinent cuius area sectionis transversalis 200 in.2 (1290 cm2) non excedit.
    NOTA 2—Parvae quantitates quorundam elementorum in chalybe mixto insunt, quae non specificantur aut requiruntur. Haec elementa quasi incidentia habentur.
    et ad maximas quantitates sequentes adesse potest: cuprum, 0.35%; nickelum, 0.25%; chromium, 0.20%; molybdenum, 0.10%.
    NOTA 3—Intervalla et limites in hac tabula dati ad analysin caloris pertinent; excepto ut a 6.1 requiritur, analyses productorum subiectae sunt legibus applicabilibus.
    tolerantiae additionales in Tabula Numero 5 datae.

     

    GradusA,B       Limites Compositionis Chemicae, %        
    Designa-                
    Carbonium Manganum Phospho- SulphurC,D Silicium Nickel Chromium Molybde-
    tio              
        RussusCmaximum maximum       numerus
                   
    1330 0.28–0.33 1.60–1.90 0.04 0.04 0.15–0.35 ... ... ...
    1335 0.33–0.38 1.60–1.90 0.04 0.04 0.15–0.35 ... ... ...
    1340 0.38–0.43 1.60–1.90 0.04 0.04 0.15–0.35 ... ... ...
    1345 0.43–0.48 1.60–1.90 0.04 0.04 0.15–0.35 ... ... ...
    3140 0.38–0.43 0.70–0.90 0.04 0.04 0.15–0.35 1.10–1.40 0.55–0.75 ...
    E3310 0.08–0.13 0.45–0.60 0.025 0.025 0.15–0.35 3.25–3.75 1.40–1.75 ...
    4012 0.09–0.14 0.75–1.00 0.04 0.04 0.15–0.35 ... ... 0.15–0.25
    4023 0.20–0.25 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4024 0.20–0.25 0.70–0.90 0.04 0.035−0.050 0.15–0.35 ... ... 0.20–0.30
    4027 0.25–0.30 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4028 0.25–0.30 0.70–0.90 0.04 0.035−0.050 0.15–0.35 ... ... 0.20–0.30
    4037 0.35–0.40 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4042 0.40–0.45 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4047 0.45–0.50 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4063 0.60–0.67 0.75–1.00 0.04 0.04 0.15–0.35 ... ... 0.20–0.30
    4118 0.18–0.23 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.40–0.60 0.08–0.15
    4130 0.28–0.33 0.40–0.60 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4135 0.32–0.39 0.65–0.95 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4137 0.35–0.40 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4140 0.38–0.43 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4142 0.40–0.45 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4145 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4147 0.45–0.50 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4150 0.48–0.53 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15–0.25
    4320 0.17–0.22 0.45–0.65 0.04 0.04 0.15–0.35 1.65–2.00 0.40–0.60 0.20–0.30
    4337 0.35–0.40 0.60–0.80 0.04 0.04 0.15–0.35 1.65–2.00 0.70–0.90 0.20–0.30
    E4337 0.35–0.40 0.65–0.85 0.025 0.025 0.15–0.35 1.65–2.00 0.70–0.90 0.20–0.30
    4340 0.38–0.43 0.60–0.80 0.04 0.04 0.15–0.35 1.65–2.00 0.70–0.90 0.20–0.30
    E4340 0.38–0.43 0.65–0.85 0.025 0.025 0.15–0.35 1.65–2.00 0.70–0.90 0.20–0.30
    4422 0.20–0.25 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.35–0.45
    4427 0.24–0.29 0.70–0.90 0.04 0.04 0.15–0.35 ... ... 0.35–0.45
    4520 0.18–0.23 0.45–0.65 0.04 0.04 0.15–0.35 ... ... 0.45–0.60
    4615 0.13–0.18 0.45–0.65 0.04 0.04 0.15–0.35 1.65–2.00 ... 0.20–0.30
    4617 0.15–0.20 0.45–0.65 0.04 0.04 0.15–0.35 1.65–2.00 ... 0.20–0.30
    4620 0.17–0.22 0.45–0.65 0.04 0.04 0.15–0.35 1.65–2.00 ... 0.20–0.30
    4621 0.18–0.23 0.70–0.90 0.04 0.04 0.15–0.35 1.65–2.00 ... 0.20–0.30
    4718 0.16–0.21 0.70–0.90 0.04 0.04 0.15–0.35 0.90–1.20 0.35–0.55 0.30–0.40
    4720 0.17–0.22 0.50–0.70 0.04 0.04 0.15–0.35 0.90–1.20 0.35–0.55 0.15–0.25
    4815 0.13–0.18 0.40–0.60 0.04 0.04 0.15–0.35 3.25–3.75 ... 0.20–0.30
    4817 0.15–0.20 0.40–0.60 0.04 0.04 0.15–0.35 3.25–3.75 ... 0.20–0.30
    4820 0.18–0.23 0.50–0.70 0.04 0.04 0.15–0.35 3.25–3.75 ... 0.20–0.30
    5015 0.12–0.17 0.30–0.50 0.04 0.04 0.15–0.35 ... 0.30–0.50 ...
    5046 0.43–0.50 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.20–0.35 ...
    5115 0.13–0.18 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5120 0.17–0.22 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5130 0.28–0.33 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.80–1.10 ...
    5132 0.30–0.35 0.60–0.80 0.04 0.04 0.15–0.35 ... 0.75–1.00 ...
    5135 0.33–0.38 0.60–0.80 0.04 0.04 0.15–0.35 ... 0.80–1.05 ...
    5140 0.38–0.43 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5145 0.43–0.48 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5147 0.46–0.51 0.70–0.95 0.04 0.04 0.15–0.35 ... 0.85–1.15 ...
    5150 0.48–0.53 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5155 0.51–0.59 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    5160 0.56–0.64 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    52100E 0.93–1.05 0.25–0.45 0.025 0.015 0.15–0.35 0.25 maximum 1.35–1.60 0.10 maximum
    E50100 0.98–1.10 0.25–0.45 0.025 0.025 0.15–0.35 ... 0.40–0.60 ...
    E51100 0.98–1.10 0.25–0.45 0.025 0.025 0.15–0.35 ... 0.90–1.15 ...
    E52100 0.98–1.10 0.25–0.45 0.025 0.025 0.15–0.35 ... 1.30–1.60 ...
                    Vanadium
                     
    6118 0.16–0.21 0.50–0.70 0.04 0.04 0.15–0.35 ... 0.50–0.70 0.10–0.15
    6120 0.17–0.22 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.70–0.90 0.10 min.
    6150 0.48–0.53 0.70–0.90 0.04 0.04 0.15–0.35 ... 0.80–1.10 0.15 min.
                     
                Aluminium   Molybdenum
                     
    E7140 0.38–0.43 0.50–0.70 0.025 0.025 0.15–0.40 0.95–1.30 1.40–1.80 0.30–0.40
                     
                Nickel    
                     
    8115 0.13–0.18 0.70–0.90 0.04 0.04 0.15–0.35 0.20–0.40 0.30–0.50 0.08–0.15
    8615 0.13–0.18 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8617 0.15–0.20 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8620 0.18–0.23 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8622 0.20–0.25 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8625 0.23–0.28 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8627 0.25–0.30 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8630 0.28–0.33 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8637 0.35–0.40 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8640 0.38–0.43 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8642 0.40–0.45 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8645 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8650 0.48–0.53 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8655 0.51–0.59 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8660 0.55–0.65 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    8720 0.18–0.23 0.70–0.90 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.20–0.30
    8735 0.33–0.38 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.20–0.30
    8740 0.38–0.43 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.20–0.30
    8742 0.40–0.45 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.20–0.30
    8822 0.20–0.25 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.30–0.40
    9255 0.51–0.59 0.60–0.80 0.04 0.04 1.80–2.20 ... 0.60–0.80 ...
    9260 0.56–0.64 0.75–1.00 0.04 0.04 1.80–2.20 ... ... ...
    9262 0.55–0.65 0.75–1.00 0.04 0.04 1.80–2.20 ... 0.25–0.40 ...
    E9310 0.08–0.13 0.45–0.65 0.025 0.025 0.15–0.35 3.00–3.50 1.00–1.40 0.08–0.15
    9840 0.38–0.42 0.70–0.90 0.04 0.04 0.15–0.35 0.85–1.15 0.70–0.90 0.20–0.30
    9850 0.48–0.53 0.70–0.90 0.04 0.04 0.15–0.35 0.85–1.15 0.70–0.90 0.20–0.30
    50B40 0.38–0.42 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.40–0.60 ...
    50B44 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.40–0.60 ...
    50B46 0.43–0.50 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.20–0.35 ...
    50B50 0.48–0.53 0.74–1.00 0.04 0.04 0.15–0.35 ... 0.40–0.60 ...
    50B60 0.55–0.65 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.40–0.60 ...
    51B60 0.56–0.64 0.75–1.00 0.04 0.04 0.15–0.35 ... 0.70–0.90 ...
    81B45 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 0.20–0.40 0.35–0.55 0.08–0.15
    86B45 0.43–0.48 0.75–1.00 0.04 0.04 0.15–0.35 0.40–0.70 0.40–0.60 0.15–0.25
    94B15 0.13–0.18 0.75–1.00 0.04 0.04 0.15–0.35 0.30–0.60 0.30–0.50 0.08–0.15
    94B17 0.15–0.20 0.75–1.00 0.04 0.04 0.15–0.35 0.30–0.60 0.30–0.50 0.08–0.15
    94B30 0.28–0.33 0.75–1.00 0.04 0.04 0.15–0.35 0.30–0.60 0.30–0.50 0.08–0.15
    94B40 0.38–0.43 0.75–1.00 0.04 0.04 0.15–0.35 0.30–0.60 0.30–0.50 0.08–0.15
                     

    B Genera in hac tabula littera B monstrata, ut 50B40, exspectari possunt ut minimum 0.0005% bori imperii habeant. AGenera in hac tabula cum praepositione litterae E monstrata plerumque per processum furni electrici basici fabricantur. Cetera omnia plerumque per processum foci aperti basici fabricantur, sed per processum furni electrici basici cum adaptationibus phosphori et sulphuris fabricari possunt.

     

    C.Limitationes phosphori sulfuris pro singulis processibus sunt hae:

    Fornax electrica fundamentalis 0.025 max % Fornax electrica acidica 0.050 max %

    Focus apertus simplex 0.040 max % Focus apertus acidus 0.050 max %

    D Minimum et maximum sulphuris contentum chalybes resulfuratas indicant.

    EEmptor has maximas quantitates specificare potest: cuprum, 0.30%; aluminium, 0.050%; et oxygenium, 0.0015%.

     

    Proprietas Mechanica

    Proprietates Tensiles Typicae, Durities et Status Thermalis pro nonnullis Gradibus Frequentioribus Chalybum Carbonis et Chalybum Compositum

     

    CW—Frigide Laboratum SR—Stressum Levatum A—Recoctum N—NormalizatumA Sequuntur definitiones symbolorum pro variis condicionibus: HR—Laminatum Calidum

    Gradus Condi- Ultimus Cede Elongatio Rockwell,
    Design- tioA Robur Robur in 2 unciis vel Duritia
    gens           50 mm, % Scala B
      ksi MPa ksi MPa
         
                 
    1020 HR 50 345 32 221 25 55
    CW 70 483 60 414 5 75
    SR 65 448 50 345 10 72
    A 48 331 28 193 30 50
    N 55 379 34 234 22 60
    1025 HR 55 379 35 241 25 60
    CW 75 517 65 448 5 80
    SR 70 483 55 379 8 75
    A 53 365 30 207 25 57
    N 55 379 36 248 22 60
    1035 HR 65 448 40 276 20 72
    CW 85 586 75 517 5 88
    SR 75 517 65 448 8 80
    A 60 414 33 228 25 67
    N 65 448 40 276 20 72
    1045 HR 75 517 45 CCCX 15 80
    CW 90 DCXXI 80 552 5 90
    SR 80 552 70 483 8 85
    A 65 448 35 241 20 72
    N 75 517 48 331 15 80
    1050 HR 80 552 50 345 10 85
    SR 82 565 70 483 6 86
    A 68 469 38 262 18 74
    N 78 538 50 345 12 82
    1118 HR 50 345 35 241 25 55
    CW 75 517 60 414 5 80
    SR 70 483 55 379 8 75
    A 50 345 30 207 25 55
    N 55 379 35 241 20 60
    1137 HR 70 483 40 276 20 75
    CW 80 552 65 448 5 85
    SR 75 517 60 414 8 80
    A 65 448 35 241 22 72
    N 70 483 43 296 15 75
    4130 HR 90 DCXXI 70 483 20 89
    SR 105 DCCXXIV 85 586 10 95
    A 75 517 55 379 30 81
    N 90 DCXXI 60 414 20 89
    4140 HR CXX DCCCLV 90 DCXXI 15 centum
    SR CXX DCCCLV centum DCLXXXIX 10 centum
    A 80 552 60 414 25 85
    N CXX DCCCLV 90 DCXXI 20 centum

    d

    Tolerantia

    Tolerantiae Diametri Externi pro Tubis Rotundis Calido-PerfectisA,B,C

     

    Amplitudo Magnitudinis Diametri Externi, Tolerantia Diametri Externi, in mm
    pollices (mm) Super Sub
    Usque ad 2.999 (76.17) 0.020 (0.51) 0.020 (0.51)
    3.000–4.499 (76.20–114.27) 0.025 (0.64) 0.025 (0.64)
    4.500–5.999 (114.30–152.37) 0.031 (0.79) 0.031 (0.79)
    6.000–7.499 (152.40–190.47) 0.037 (0.94) 0.037 (0.94)
    7.500–8.999 (190.50–228.57) 0.045 (1.14) 0.045 (1.14)
    9.000–10.750 (228.60–273.05) 0.050 (1.27) 0.050 (1.27)

     

    Tolerantiae diametri non applicantur ad condiciones normalizatas et temperatas vel extinctas et temperatas.

    B Communis magnitudinum series tuborum calido confectorum est 11⁄2 pollicem (38.1 mm) ad 103Diametro externo ⁄4 in. (273.0 mm) cum crassitudine parietis saltem 3% vel plus diametri externi, sed non minore quam 0.095 in. (2.41 mm).

    Magnitudines maiores praesto sunt; de magnitudinibus et tolerantiis fabricatorem consule.

     

    Tolerantiae Crassitudinis Muri pro Rotundis Calidis Finitis

    Tubus

    Crassitudo muri

    Tolerantia Crassitudinis Muri,Apercentum supra
    Intervallum ut Percentum

    et Sub Nominali
    Externae

    Extra

    Extra

    Extra
    Diameter

    Diameter

    Diameter

    Diameter

    2.999 unciae

    Tria milia unciarum.

    Sex milia unciarum.

    (76.19 mm)

    (76.20 mm)

    (152.40 mm)

    et minor

    ad 5.999 uncias

    ad 10.750 uncias

    (152.37 mm)

    (273.05 mm)
    Sub quindecim annos

    12.5

    10.0

    10.0
    Quindecim annos nati et maiores

    10.0

    7.5

    10.0
    Tolerantiae crassitudinis parietum ad parietes 0.199 in. (5.05 mm) et minores fortasse non applicantur; de tolerantiis parietum in talibus magnitudinibus tuborum fabricatorem consule.
    Si dimensionem maiorem magni momenti habes, tubi frigide elaborati ad diametrum internam et crassitudinem parietis vel diametrum externam et diametrum internam specificandi sunt.
    Tubi Mechanici Ruditer Tornati — Variatio in diametro externo et crassitudine parietis tolerantiam in Tabula non excedere debet. Tabula tolerantias tegit ut ad diametrum externum et crassitudinem parietis applicantur et ad magnitudinem specificatam pertinet.
    Tubi Mechanici Subterranei — Variatio in diametro externo tolerantias in Tabula non excedere debet. Hoc productum plerumque ex tubo frigido opere fabricatur.
    Longitudines—Tubi mechanici vulgo in longitudinibus laminarum, 5 pedes (1.5 m) et ultra, praebentur. Longitudines definitae sectae praebentur cum ab emptore specificantur. Tolerantiae longitudinis in Tabula . monstrantur.
    Rectitudo — Tolerantiae rectitudinis pro tubis rotundis sine suturis quantitates in Tabula monstratas non excedere debent.

     

    Requisitum Probationis

    1. Examen Duritiae
    Cum limites duritiae requiruntur, fabricator consulendus est. Duritiae typicae in Tabula . Cum specificantur, probatio duritiae in 1% tuborum peragenda est.

    2. Experimenta Tensionis
    Cum proprietates tensiles requiruntur, fabricator consulendus est. Proprietates tensiles typicae pro nonnullis generibus et condicionibus thermalibus communioribus in tabula enumerantur.

    3. Experimenta Non Destructiva
    Varia genera probationum non destructivarum ultrasonicarum vel electromagneticarum praesto sunt. Probatio adhibenda et limites inspectionis a consensu fabricatoris et emptoris constituentur.

    4. Examen Flaring
    Cum requisita specialia de puritate chalybis exstant, modi probationis et limites acceptationis a fabricante et emptore consensu constituentur.

    Detalia Producti

    Tubi Mechanici/Chemici et Stercorarii

    GB/T8162-2008

    ASTM A519-2006

    BS EN 10210-1-2006

    ASTM A53/A53M-2012

    GB9948-2006

    GB6479-2013

    GB/T 17396-2009

  • Praecedens:
  • Deinde:
    • Nuntium tuum hic scribe et nobis mitte.
    Preme "Enter" ad quaerendum vel "ESC" ad claudendum